self-healing

Geosynthetic clay liners (GCLs) are mostly used as flow barriers in landfills and waste containments due to their low hydraulic conductivity to prevent the leachate from reaching the environment. The self-healing and swell-shrink properties of soft clays (expansive soils) such as bentonite enable them as promising materials for the GCL core layers. However, it is important to modify their physico-chemical properties in order to overcome the functional limitations of GCL under different hydraulic conditions...

Herein, a self-healing polyacrylate system was successfully prepared by introducing crosslinking agents containing disulfide bonds and monomers capable of forming quadruple hydrogen bonds through free radical copolymerization. This polymer material exhibited good toughness and self-healing properties through chemical and physical dual dynamic networks while maintaining excellent mechanical properties, which expanded the development path of self-healing acrylate materials. Compared to uncrosslinked and single dynamically crosslinked polymers, its elongation at break was as high as 437%, and its tensile strength was 5...

Ionic charge transport is a ubiquitous language of communication in biological systems. As such, bioengineering is in constant need of innovative, soft, and biocompatible materials that facilitate ionic conduction. Low molecular weight gelators (LMWGs) are complex self-assembled materials that have received increasing attention in recent years. Beyond their biocompatible, self-healing, and stimuli responsive facets, LMWGs can be viewed as a "solid" electrolyte solution. In this work, we investigate 3,4-ethylenedioxythiophene (EDOT) as a capping group for a small peptide library, which we use as a system to understand the relationship between modes of assembly and charge transport in supramolecular gels...

This Perspective aims to present the current status and future opportunities for polymer science in battery technologies. Polymers play a crucial role in improving the performance of the ubiquitous lithium ion battery. But they will be even more important for the development of sustainable and versatile post-lithium battery technologies, in particular solid-state batteries. In this article, we identify the trends in the design and development of polymers for battery applications including binders for electrodes, porous separators, solid electrolytes, or redox-active electrode materials...

There is usually a trade-off between high mechanical strength and dynamic self-healing because the mechanisms of these properties are mutually exclusive. Herein, we design and fabricate a fluorinated phenolic polyurethane (FPPU) elastomer based on octafluoro-4,4'-biphenol to overcome this challenge. This fluorine-based motif not only tunes interchain interactions through π-π stacking between aromatic rings and free-volume among polymer chains but also improves the reversibility of phenol-carbamate bonds via electron-withdrawing effect of fluorine atoms...

Although conductive hydrogels have been widely developed currently, their low sensitivity and poor stability severely limited their practical application in flexible wearable devices. Herein, a green "stencil" anchoring strategy was proposed in this study to engineer an ultra-stable and supersensitive hydrogel by virtue of polydopamine decorating sodium alginate molecular chains as "stencil" to anchor polyaniline as conductive component. The dispersion of polyaniline was significantly improved by the sodium alginate "stencil" in the conductive hydrogel...

Manufacturing flexible sensors with prominent mechanical properties, multifunctional sensing abilities, and remarkable self-healing capabilities remains a difficult task. In this study, a novel vanillin-modified polyacrylate (VPA), which is capable of forming green dynamic covalent crosslinking with chitosan (CS), was synthesized. The synthesized VPA was combined with mesoporous silica-modified MXene (AMS-MXene) and covalently cross-linked simultaneously with CS, resulting in the formation of a flexible composite conductive film designed for dual-mode sensors...

Among different microbial-induced calcium carbonate precipitation (MICCP) mechanisms utilized for biomineralization, ureolysis leads to the greatest yields of calcium carbonate. Unfortunately, it is reported that urea-induced growth inhibition can delay urea hydrolysis but it is not clear how this affects MICCP kinetics. This study investigated the impact of urea addition on the MICCP performance of Lysinibacillus sphaericus MB284 not previously grown on urea (thereafter named bio-agents), compared with those previously cultured in urea-rich media (20 g/L) (hereafter named bio-agents+ or bio-agents-plus)...

Improving the durability of wear-resistant superhydrophobic surfaces is crucial for their practical use. To tackle this, research is now delving into self-healing superhydrophobic surfaces. In our study, we developed superhydrophobic cotton fabrics by embedding nano-silica particles, micro-silica powder, and polydimethylsiloxane (PDMS) using a dipping method. This innovative design grants the SiO2 /PDMS cotton fabric remarkable superhydrophobicity, reflected by a water contact angle of 155°. Moreover, the PDMS was stored in the amorphous areas of cellulose of cotton fabrics, attaching to the fiber surface and playing a role in connecting micro-blocks and nano-particles...

Wound healing is a dynamic and complex process, it's urgent to develop new wound dressings with excellent performance to promote wound healing at the different stages. Here, a novel composite hydrogel dressing composed by silver nanoparticles (AgNPs) impregnated adenine-modified chitosan (CS-A) and octafunctionalized polyhedral oligomeric silsesquioxane (POSS) of benzaldehyde-terminated polyethylene glycol (POSS-PEG-CHO) solution was presented to solve the problem of wound infection. Modification of chitosan with adenine, not only can improve the water solubility of chitosan, but also introduce bioactive substances to promote cell proliferation...

When exposed to the geostationary orbit, polymeric materials tend to degrade on their surface due to the appearance of cracks. Implementing the self-healing concept in polymers going to space is a new approach to enhancing the lifespan of materials that cannot be replaced once launched. In this study, the elaboration of autonomous self-healing transparent poly(dimethylsiloxane) (PDMS) materials resistant to proton particles is presented. The PDMS materials are functionalized with various compositions of urea and imine moieties, forming dynamic covalent and/or supramolecular networks...

Poly(vinylidene fluoride) (PVDF) is predominantly characterized by alternating CH2 and CF2 units in a polymer backbone, originating from the head-to-tail addition of monomers or regular propagation. Due, to a small extent, to inverse monomer addition, so-called defect structures occur which influence the macroscopic properties of PVDF significantly. The amount of defect structures in the material is determined by the polymerization conditions. Here, the temperature dependence of the fraction of defect structures in PVDF obtained from polymerizations between 45 and 90 °C is reported...

Two polyurethanes (PUs) were similarly synthesized by reacting a cycloaliphatic isocyanate with 1,4-butanediol and two polyols of different nature (polyester, polycarbonate diol) with molecular weights of 1000 Da. Only the PU synthesized with polycarbonate diol polyol (YCD) showed intrinsic self-healing at 20 °C. For assessing the mechanism of intrinsic self-healing of YCD, a structural characterization by molecular weights determination, infrared and X-ray photoelectronic spectroscopies, differential scanning calorimetry, X-ray diffraction, thermal gravimetric analysis, and dynamic mechanical thermal analysis was carried out...

Within the realm of dental material innovation, this study pioneers the incorporation of tung oil into polyurea coatings, setting a new precedent for enhancing self-healing functionality and durability. Originating from an ancient practice, tung oil is distinguished by its outstanding water resistance and microbial barrier efficacy. By synergizing it with polyurea, we developed coatings that unite mechanical strength with biological compatibility. The study notably quantifies self-healing efficiency, highlighting the coatings' exceptional capacity to mend physical damages and thwart microbial incursions...

Tung oil (TO) microcapsules (MCs) with a poly(urea-formaldehyde) (PUF) shell were synthesized via one-step in situ polymerization, with the addition of graphene nanoplatelets (GNPs) (1-5 wt. %). The synergistic effects of emulsifiers between gelatin (gel) and Tween 80 were observed, with gel chosen to formulate the MCs due to its enhanced droplet stability. SEM images then displayed an increased shell roughness of the TO-GNP MCs in comparison to the pure TO MCs due to the GNP species on the shell. At the same time, high-resolution transmission electron microscopy (TEM) images also confirmed the presence of GNPs on the outer layer of the MCs, with the stacked graphene layers composed of 5-7 layers with an interlayer distance of ~0...

Corrosion activities and biofouling pose significant challenges for marine facilities, resulting in substantial economic losses. Inspired by the "brick&mortar" structure of pearls, a novel nanocomposite coating (Pun-HJTx ) with long-lasting anti-corrosion and intelligent antifouling modes is fabricated by integrating a compatible MoS2 /MXene heterostructure as the "brick" into a polyurea-modified PDMS (Pun) acting as "mortar". Notably, the presence of multiple hydrogen bonds within the coating effectively reduces the pinholes resulted from solution volatilizing...

Biodegradable stents are the most promising alternatives for the treatment of cardiovascular disease nowadays, and the strategy of preparing functional coatings on the surface is highly anticipated for addressing adverse effects such as in-stent restenosis and stent thrombosis. Yet, inadequate mechanical stability and biomultifunctionality limit their clinical application. In this study, we developed a multicross-linking hydrogel on the polylactic acid substrates by dip coating that boasts impressive antithrombotic ability, antibacterial capability, mechanical stability, and self-healing ability...

In this study, hydrogels were produced using a Schiff base reaction between two hyaluronic acid derivatives: one containing aldehyde groups (HA-Ald) and the other holding a diethylenetriamine with terminal amino groups (HA-DETA). The DETA portion promotes the in situ growth, complexation, and stabilization of silver nanoparticles (AgNPs), eliminating the need for external reducing agents. The reaction between HA-DETA and HA-Ald leads to the formation of imine bonds, which results in dynamically pH-responsive cross-linking...

Three dimensional (3D) extrusion bioprinting aims to replicate the complex architectures and functions of natural tissues and organs. However, the conventional hydrogel and new-emerging microgel bioinks are both difficult in achieving simultaneously high shape-fidelity and good maintenance of cell viability/function, leading to limited amount of qualified hydrogel/microgel bioinks. Herein, a universal strategy is reported to construct high-performance microgel assembly (MA) bioinks by using epigallocatechin gallate-modified hyaluronic acid (HA-EGCG) as coating agent and phenylboronic acid grafted hyaluronic acid (HA-PBA) as assembling agent...

•Site-specific administration is key for optimizing anticancer drug administration; self-healing hydrogels may allow this at reasonable costs and reproducibility.•Self-healing hydrogels have several real-world therapeutic applications, including drug administration.•Self-healing hydrogels are yet to be utilized for chemotherapy drug administration in clinical trials.•Clinical research on using self-healing hydrogels in anticancer therapeutics is feasible and valid compared to other advances in anticancer drug administration...