Waste material

A circular economy based on symbiotic relationships among sectors, where the waste from one is resource to another, holds promise for cost-effective and sustainable production. This research explores such a model for the agriculture, energy, and construction sectors in California. Here, we develop new an understanding for the synergistic utilization mechanisms for rice hull, a byproduct from rice production, as a feedstock for electricity generation and rice hull ash (RHA) used as a supplementary cementitious material in concrete...

Organic fraction of municipal solid waste (OFMSW) and waste activated sludge (WAS) are the most produced organic waste streams in urban centres. Their anaerobic co-digestion (AcoD) allows to generate methane (CH4 ) and digestate employable as renewable energy source and soil amendment, respectively, fully in accordance with circular bioeconomy principles. However, the widespread adoption of such technology is limited by relatively low CH4 yields that fail to bridge the gap between benefits and costs. Among strategies to boost AcoD of OFMSW and WAS, use of conductive materials (CMs) to promote interspecies electron transfer has gained increasing attention...

To understand which are the best strategies for textile waste management and to analyse the effects on the environment of applying circular economy practices to textile products, a review of 45 publications where life cycle assessment (LCA) is applied to these topics has been carried out. The separate collection of textiles, followed by reuse and recycling brings relevant environmental benefits, with impacts related to reuse resulting lower than those of recycling. At the opposite, when mixed municipal solid waste is addressed to energy recovery, the textile fraction is the second most impacting on climate change, right after plastics, while for landfill disposal impacts textiles directly follow the more biodegradable fractions...

Supercritical CO2 (scCO2 ) extraction assisted by complexing copolymers is a promising process to recover valuable metals from lithium-ion batteries (LIBs). CO2 , in addition to being non-toxic, abundant and non-flammable, allows an easy separation of metal-complexes from the extraction medium by depressurization, limiting the wastewater production. In this study, CO2 -philic gradient copolymers bearing phosphonic diacid complexing groups (poly(vinylbenzylphosphonic diacid-co-1,1,2,2-tetrahydroperfluorodecylacrylate), p(VBPDA-co-FDA)) were synthesized for the extraction of lithium and cobalt from LiCoO2 cathode material...

Composted sewage sludge was investigated as a promising material for the reclamation or remediation of degraded sites. Using sewage sludge as soil amendment provides environmental benefits and risks while supporting circularity and waste minimisation. This study aims to comprehensively assess the suitability of locally available low-cost sludge treatment for sustainable and environmentally safe topsoil disposal in a brownfield area affected by coal mining. A nine-month composting was conducted before field application to the soil environment...

Lignin is an abundant natural biopolymer found in plant cell walls. Lignin can come from tinctorial plants, whose residual biomass after dye extraction was typically discarded as waste. The main objective of this study was to extract lignin from the residual biomass of Reseda luteola L. using an organosolv process and to optimize the extraction conditions. The extracted lignin was characterized, and its potential applications as an antimicrobial, anti-oxidant, and anti-UV agent were investigated. Response surface methodology based on a Box-Behnken design was employed to optimize the lignin extraction conditions (organic acid concentration, material-to-liquid ratio, extraction time)...

The prosperity of the lithium-ion battery market is inevitably accompanied by the depletion of corresponding resources and the accumulation of spent batteries in a dialectical manner. Spent lithium-ion batteries are harboring the characteristics of hazardous waste and high-value resources, so efficient recycling is of great significance. The cathode material is considered as an interesting target for repurposing. Despite some important reviews give commendable emphasis to recycling technologies, there is still a dearth of exploration of recycling mechanisms...

To aid in the creation of sustainable structures, scientists have utilized waste materials found in the environment to serve as alternatives for traditional resources in the construction sector. They have undertaken extensive investigations pertaining to this matter. In this particular study, tempered glass as waste glass coarse aggregate (WGCA) was substituted for natural coarse aggregate (NCA) at varying proportions of 15%, 30%, and 45% in the formulation of eco-friendly self-compacting concrete (SCC), combined with hooked-end steel fibers (SFs) at various volumes...

Lithium carboxymethyl cellulose (CMC-Li) is a promising novel water-based binder for lithium-ion batteries. The direct synthesis of CMC-Li was innovatively developed using abundant wood dissolving pulp materials from hardwood (HW) and softwood (SW). The resulting CMC-Li-HW and CMC-Li-SW binders possessed a suitable degree of substitutions and excellent molecular weight distributions with an appropriate quantity of long- and short-chain celluloses, which facilitated the construction of a reinforced concrete-like bonding system...

Large-scale cement production generates significant amounts of carbon dioxide from the breakdown of limestone, contributing to environmental pollution. Clean production of eco-friendly three-dimensional geopolymers can be used as environmentally friendly building materials. Replacing Portland cement with eco-friendly materials correlates with reduced energy consumption, costs, and negative environmental impact. In addition, geopolymer cement has above-average physical and chemical properties, which in many cases exceed conventional Portland cement...

ETHNOPHARMACOLOGICAL RELEVANCE: The ecological environment of Northeast region of India (NER), with its high humidity, has resulted in greater speciation and genetic diversity of plant, animal, and microbial species. This region is not only rich in ethnic and cultural diversity, but it is also a major biodiversity hotspot. The sustainable use of these bioresources can contribute to the region's bioeconomic development. AIM OF THE STUDY: The review aimed to deliver various perspectives on the development of bioeconomy from NER bioresources under the tenets of sustainable utilization and socioeconomic expansion...

BACKGROUND: The effects of prenatal element exposure on mothers and fetuses have generated concern. Profiles of trace and toxic elements in biological material are urgently desired, especially for women who reside near e-waste recycling facilities. The aim of this study was to investigate elements concentrations in placenta, cord blood, and maternal blood of women and to evaluate the influencing factors. METHODS: A group of 48 women from an e-waste recycling site and a group of 31 women from a non-e-waste recycling site were recruited...

The versatility of plastic has resulted in huge amounts being consumed annually. Mismanagement of post-consumption plastic material has led to plastic waste pollution. Biodegradation of plastic by microorganisms has emerged as a potential solution to this problem. Therefore, this study aimed to investigate the microbial communities involved in the biodegradation of polypropylene (PP). Mangrove soil was enriched with virgin PP sheets or chemically pretreated PP comparing between 2 and 4 months enrichment to promote the growth of bacteria involved in PP biodegradation...

A lot of solid waste coal gangue is produced every year in the process of coal mining and coal washing, which poses a great threat to human health. How to deal with coal gangue properly is still a serious problem. In this study the macro-micro composite porous mullite ceramic skeletons were successfully prepared using solid waste coal gangue and α-Al2 O3 as main raw materials via twice pore-forming technology. The main phase composition of the porous ceramic skeletons was mullite tested by X-ray Diffractometer (XRD)...

AIM: This study aimed to assess and compare debris quality expelled beyond the apex during re-treatment using two reciprocating and two re-treatment rotary files. MATERIALS AND METHODS: A total of 80 healthy human mandibular premolars excised for orthodontic therapy were selected. Distilled water was used to sterilize the teeth before they were preserved. The canals were widened and coronal access was created so that the F2 ProTaper universal system could be used...

UNLABELLED: Greenhouse gases (GHGs) can be produced from a broad range of anthropogenic activities at different spatial and temporal scales. In particular, emissions from urban area are an import source of GHGs. City is a complicated system consisting of various component and processes. Efforts have been made to reduce urban GHG emissions. However, there is a lack of available methods for effective assessment of such emissions. Many urban sources and factors which can influence the emissions are still unknown...

Idiopathic normal pressure hydrocephalus in elderly people is considered a form of glymphopathy caused by malfunction of the waste clearance pathway, called the glymphatic system. Tau is a representative waste material similar to amyloid-β. During neurodegeneration, lipocalin-type prostaglandin D synthase (L-PGDS), a major cerebrospinal fluid (CSF) protein, is reported to act as a chaperone that prevents the neurotoxic aggregation of amyloid-β. L-PGDS is also a CSF biomarker in idiopathic normal pressure hydrocephalus and significantly correlates with tau concentration, age, and age-related brain white matter changes detected by magnetic resonance imaging...

Polyethylene terephthalate (PET), one of the most ubiquitous engineering plastics, presents both environmental challenges and opportunities for carbon neutrality and a circular economy. This review comprehensively addressed the latest developments in biotic and abiotic approaches for PET recycling/upcycling. Biotically, microbial depolymerization of PET, along with the biosynthesis of reclaimed monomers [terephthalic acid (TPA), ethylene glycol (EG)] to value-added products, presents an alternative for managing PET waste and enables CO2 reduction...

The disintegration of raw sludge is of importance for enhancing biogas production and facilitates the degradation of substrates for microorganisms so that the efficiency of digestion can be increased. In this study, the effect of hydrodynamic cavitation (HC) as a pretreatment approach for waste activated sludge (WAS) was investigated at two upstream pressures (0.83 and 1.72 MPa) by using a milli-scale apparatus which makes sludge pass through an orifice with a restriction at the cross section of the flow. The HC probe made of polyether ether ketone (PEEK) material was tested using potassium iodide solution and it was made sure that cavitation occurred at the selected pressures...

The conversion of waste biomass into a value-added carbonaceous nanomaterial highlights the appealing power of biomass valorization. The advantages of using sustainable and cheap biomass precursors exhibit the tremendous opportunity for boosting energy production and their application in environmental remediation processes. This review emphasis the development and production of carbon-based nanomaterials derived from biomass, which possess favourable characteristics such as biocompatibility and photoluminescence...