Graphen Oxide

Three-dimensional (3D) macroscopic aerogels have emerged as a critical component in the realm of photocatalysis. Maximizing the integration of materials can result in enhanced efficiency and selectivity in photocatalytic processes. In this investigation, we fabricated MOF-808/reduced graphene oxide (RGO) 3D macroscopic aerogel composite materials employing the techniques of hydrothermal synthesis and freeze-drying. The results revealed that the macroscopic aerogel material exhibited the highest performance in CO2 reduction to CO, particularly when the concentration of RGO was maintained at 5 mg mL-1 ...

Developing high-performance composites with fast charging and superior cycle life is paramount for lithium-ion batteries (LIBs). Herein, we synthesized a double-shell carbon-coated porous structure composite with a compact surface (P-Si@rGO@C) using low-cost commercial micron-sized silicon (Si) instead of nanoscale silicon. Results reveal that the unique P-Si@rGO@C features high adaptability to volume expansion, accelerates electron/ion transmission rate, and forms a stable solid electrolyte interphase (SEI) film...

The separation of xylene isomers is of vital importance in chemical industry but remains challenging due to their similar structure and overlapping physiochemical properties. Membrane-based separations using the zeolite MFI, graphene oxide, and metal-organic frameworks have been intensively studied for this application, but the performance is limited by the well-known rule that the filtrate permeance scales inversely with the membrane thickness. We propose a novel membrane design that is capable of breaking this rule, based on an array of recently discovered zeolite nanotubes...

BACKGROUND: This in vivo study evaluated the effect of graphene oxide and graphite coatings, coupled with the micro-arc oxidation (MAO) surface roughening technique, known for their mechanical strength, chemical stability, and antibacterial properties. The main objective was to assess the degree of improvement in osseointegration of titanium implants resulting from these interventions. MATERIALS AND METHODS: In this study, 32 female rats were utilized and randomly allocated into four groups ( n  = 8 each): machined surface titanium implants (control), those roughened by the MAO method, those coated with graphene oxide-doped MAO, and those with a graphite-doped MAO coating...

The surge in interest surrounding energy storage solutions, driven by the demand for electric vehicles and the global energy crisis, has spotlighted the effectiveness of carbon-based supercapacitors in meeting high-power requirements. Concurrently, metal-organic frameworks (MOFs) have gained attention as a template for their integration with graphene oxide (GO) in composite materials which have emerged as a promising avenue for developing high-power supercapacitors, elevating smart supercapacitor efficiency, cyclic stability, and durability, providing crucial insights for overcoming contemporary energy storage obstacles...

The potential of metal oxides in electrochemical energy storage encouraged our research team to synthesize molybdenum oxide/tungsten oxide nanocomposites (MoO3 /WO3 ) and their hybrid with reduced graphene oxide (rGO), in the form of MoO3 /WO3 /rGO as a substrate with relatively good electrical conductivity and suitable electrochemical active surface. In this context, we presented the electrochemical behavior of these nanocomposites as an electrode for supercapacitors and as a catalyst in the oxidation process of methanol/ethanol...

A novel amine-functionalized graphene oxide (AFG) doped polyvinyl alcohol (PVA)/chitosan (PVA-Ch) composite film was developed using an eco-synthesis approach, eliminating the need for halogenated compounds. The resulting AFG-doped PVA/Chitosan (PVA-Ch/AFG) polymer film exhibited promising properties for controlled delivery and biosensing applications. The investigation included assessing the swelling behaviour, dissolution percent, gel fraction, and mechanical properties of the polymer film. The swelling characteristics of PVA-Ch and PVA-Ch/AFG were found to be pH and temperature-dependent across various pH ranges (3, 5, 7, and 9)...

Antibiotics are refractory degradable organic pollutants that present a significant hazard to water environments. In this work, a ternary composite (KB/BMO-GO) comprising of graphene oxide (GO), Bi2 MoO6 (BMO), and a cross-linked benzene polymer (KB) was synthesized and applied to promote the synergistic adsorption-photocatalytic degradation of the refractory pollutant, oxytetracycline (OTC). The inclusion of GO and KB in the composite enhanced the OTC adsorption performance of the catalysts, and the construction of Z-scheme heterojunction promoted the photogenerated charge separation efficiency and broadened the range of light absorption, thereby enhancing the photocatalytic performance...

Given the challenging task of constructing an efficient nitrogen reduction reaction (NRR) electrocatalyst with enhanced ambient condition performance, properties such as high specific surface area, fast electron transfer, and design of the catalyst surface constitute a group of key factors to be taken into consideration to guarantee outstanding catalytic performance and durability. Thereof, this work investigates the contribution of the 2D/2D heterojunction interface between MoS2 and reduced graphene oxide (rGO) on the electrocatalytic synthesis of NH3 in an alkaline media...

Silver has long been recognized for its potent antimicrobial properties, but achieving a slow and longer-term delivery of silver ions presents significant challenges. Previous efforts to control silver ion dosages have struggled to sustain release for extended periods in biomimetic environments, especially in the presence of complex proteins. This challenge is underscored by the absence of technology for sustaining antimicrobial activity, especially in the context of orthopedic implants where long-term efficacy, extending beyond 7 days, is essential...

No abstract text is available yet for this article.

Quetiapine Fumarate (QF) is an atypical antipsychotic with poor oral bioavailability (9%) due to its low permeability and pH-dependent solubility. Therefore, this study aims to design QF-loaded polyethylene glycol (PEG) functionalized graphene oxide nanosheets (GON) for nasal delivery of QF. In brief, GO was synthesized using a modified Hummers process, followed by ultra-sonication to produce GON. Subsequently, PEG-functionalized GON was prepared using carbodiimide chemistry (PEG-GON). QF was then decorated onto the cage of PEG-GON using the π-π stacking phenomenon (QF@PEG-GON)...

Antibiotics released into water sources pose significant risks to both human health and the environment. This comprehensive review meticulously examines the ecotoxicological impacts of three prevalent antibiotics-ciprofloxacin, metronidazole, and sulfamethoxazole-on the ecosystems. Within this framework, our primary focus revolves around the key remediation technologies: adsorption and advanced oxidation processes (AOPs). In this context, an array of adsorbents is explored, spanning diverse classes such as biomass-derived biosorbents, graphene-based adsorbents, MXene-based adsorbents, silica gels, carbon nanotubes, carbon-based adsorbents, metal-organic frameworks (MOFs), carbon nanofibers, biochar, metal oxides, and nanocomposites...

Rechargeable magnesium-metal batteries (RMMBs) are promising next-generation secondary batteries; however, their development is inhibited by the low capacity and short cycle lifespan of cathodes. Although various strategies have been devised to enhance the Mg2+ migration kinetics and structural stability of cathodes, they fail to improve electronic conductivity, rendering the cathodes incompatible with magnesium-metal anodes. Herein, we propose a dual-defect engineering strategy, namely, the incorporation of Mg2+ pre-intercalation defect (P-Mgd ) and oxygen defect (Od ), to simultaneously improve the Mg2+ migration kinetics, structural stability, and electronic conductivity of the cathodes of RMMBs...

The management of infected bone defects poses a significant clinical challenge, and current treatment modalities exhibit various limitations. This study focuses on the development of a multifunctional composite scaffold comprising nanohydroxyapatite/polyethyleneglycol diacrylate (HP) matrix, silver nanoparticles (AgNPs), graphene oxide (GO), sodium alginate (SA), and M2-type macrophage membrane vesicles (MVs) to enhance the healing of infected bone defects. The composite scaffold demonstrates several key features: first, it releases sufficient quantities of silver ions to effectively eliminate bacteria; second, the controlled release of MVs leads to a notable increase in M2-type macrophages, thereby significantly mitigating the inflammatory response...

Candida species are escalating resistance to conventional antifungal treatments, intensifying their virulence, and obstructing the effectiveness of antifungal medications. Addressing this challenge is essential for effectively managing Candida infections. The overarching objective is to advance the development of more efficient and precise therapies tailored to counter Candida infections. This study focuses on developing antifungal combined drugs using curcumin-enhanced silver-functionalized graphene nanocomposites (Cur-AgrGO) to effectively target key virulence factors of C...

BACKGROUND: Graphene oxide nanosheets (GONS) are recognized for their role in enhancing drug delivery and effectiveness in cancer treatment. With colon cancer being a prevalent global issue and the significant side effects associated with chemotherapy, the primary treatment for colon cancer alongside surgery, there is a critical need for novel therapeutic strategies to support patients in combating this disease. Hesperetin (HSP), a natural compound found in specific fruits, exhibits anti-cancer properties...

Aqueous lithium-ion batteries (LIBs) have received increasing attention as a promising solution for stationary energy storage systems due to their low environmental impact, non-flammability and low cost. Despite recent progress in electrolyte development and cathode manufacturing, the lack of anode materials with high specific capacity presents difficult challenges for a wide range of applications. In this study, we propose a novel synthetic strategy to fabricate a pseudocapacitive V2 O5 /graphene composite as a highly functional anode material for aqueous LIBs...

The separation of CO2 from N2 remains a highly challenging task in postcombustion CO2 capture processes, primarily due to the relatively low CO2 content (3-15%) compared to that of N2 (70%). This challenge is particularly prominent for carbon-based adsorbents that exhibit relatively low selectivity. In this study, we present a successfully implemented strategy to enhance the selectivity of composite aerogels made of reduced graphene oxide (rGO) and functionalized polymer particles. Considering that the CO2 /N2 selectivity of the aerogels is affected on the one hand by the surface chemistry (offering more sites for CO2 capture) and fine-tuned microporosity (offering molecular sieve effect), both of these parameters were affected in situ during the synthesis process...

The current study aims to conduct an empirical investigation on the performance of copper (II) oxide (CuO), Graphene Oxide (GO), and Molybdenum (VI) Oxide (MoO3) nanoparticles as additives for HB-80 base lubricant and their effects on essential characteristics such as density, flashpoint and flammability, cloud point and pour point, viscosity and viscosity indicators, thermal conductivity coefficient, friction coefficient and wear. The test results show that nanoparticles have minor effects on density and viscosity but managed to improve viscosity indicators...