chemical curing nanocomposites

The addition of a small fraction of solid nanoparticles to thermosetting polymers can substantially improve their fracture toughness, while maintaining various intrinsic thermomechanical properties. The underlying mechanism is largely related to the debonding process and subsequent formation of nanovoids at a nanoscale nanoparticle/epoxy interface, which is thought to be associated with a change in the structural and mechanical properties of the formed epoxy network at the interface compared with the matrix region...

The COVID-19 pandemic has the tendency to affect various organizational paradigm alterations, which civilization hasyet to fully comprehend. Personal to professional, individual to corporate, and across most industries, the spectrum of transformations is vast. Economically, the globe has never been more intertwined, and it has never been subjected to such widespread disruption. While many people have felt and acknowledged the pandemic's short-term repercussions, the resultant paradigm alterations will certainly have long-term consequences with an unknown range and severity...

Cancer is one of the most challenging, life-threatening illnesses to cure, with over 10 million new cases diagnosed each year globally. Improved diagnostic cum treatment with common side-effects are warranting for successful therapy. Nanomaterials are recognized to improve early diagnosis, imaging, and treatment. Recently, multifunctional nanocomposites attracted considerable interest due to their low-cost production, and ideal thermal and chemical stability, and will be beneficial in future diagnostics and customized treatment capacity...

Breaking the trade-off between filtration performance and antifouling property is critical to enabling a thin-film nanocomposite (TFC) nanofiltration (NF) membrane for a wide range of feed streams. We proposed a novel design route for TFC NF membranes by grafting well-defined zwitterionic copolymers of [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) and 2-aminoethyl methacrylate hydrochloride (AEMA) on the polyamide surfaces via an in situ surface chemical modification process. The successful grafting of a zwitterionic copolymer imparted the modified NF membranes with better surface hydrophilicity, a larger actual surface area (i...

Linen fibres were coated with a glow-in-the-dark photoluminescence, flame-retarding, and hydrophobic smart nanocomposite using the pad-dry-curing process. Ecologically friendly ammonium polyphosphate and lanthanide-activated strontium aluminium oxide (LSAO) nanoparticles were immobilized into linen fabric using eco-friendly room-temperature-vulcanizing silicone rubber. Different analytical techniques were used to examine the morphological characteristics and elemental compositions of LSAO nanoparticles and treated linen textiles...

In silica-rubber based nanocomposites, a single organo-silicon is often used to compatibilize and covalently link silica to rubber. In this work, we have investigated the impact, at micro- and macroscales, of the decoupling of the hydrophobization and the coupling activity of silane by pretreating silica with two different silane chemistries. The first one, a mercaptosilane, is the coupling agent that promotes a covalent link between silica and rubber during the sulfur-mediated vulcanization reaction. The second one, an alkylsilane, aims to improve the silica dispersion...

An isocyanate with trimethoxysilane groups at the side chains (IPDI-M) was synthesized via an addition between the mercaptopropyl trimethoxysilane groups (MPTMS) and IPDI tripolymer (IPDI-T). Then, silane grafted isocyanate as the functional hard segment, castor oil as the soft segment, poly (ethylene adipate) diol (PEA) as the chain extender, and MPTMS as an end-capping reagent were applied to form a series of organosilicon hybrid bio-based polyurethane (CPUSi). The effect of the IPDI-M contents on the thermal stability, mechanical properties, and surface properties of the resulting product was systematically investigated...

Cotton is one of the most important raw materials for textile and clothing production. The main drawbacks of cotton fibers are their poor mechanical properties and high flammability. Compared with some synthetic polymer fibers, cotton fabrics treated with modern flame-retardant and reinforcement finishes often cannot meet rigid military specifications. Polypyrrole-magnesium oxide (ppy-MgO) and polypyrrole-magnesium oxide-carbon nanotube (ppy-MgO-CNT) composites were prepared with various weight ratios by in situ chemical polymerization method...

The polymeric properties are tailored and enhanced by high energy radiation processing, which is an effective technique to tune the physical, chemical, thermal, surface, and structural properties of the various thermoplastic and elastomeric polymeric components. The gamma and electron beam radiation are the most frequent radiation techniques used for crosslinking, compatibilizing, and grafting of various polymer blends and composites systems. The gamma radiation-induced grafting and crosslinking are the effective, rapid, clean, user-friendly, and well-controlled techniques for the polymeric materials for their properties improvement for high performance applications such as nuclear, automobile, electrical insulation, ink curing, surface modification, food packaging, medical, sterilization, and health-care in a different environment...

Formation and aggregation of metal carboxylates (metal soaps) can degrade the appearance and integrity of oil paints, challenging efforts to conserve painted works of art. Endeavors to understand the root cause of metal soap formation have been hampered by the limited spatial resolution of Fourier transform infrared microscopy (μ-FTIR). We overcome this limitation using optical photothermal infrared spectroscopy (O-PTIR) and photothermal-induced resonance (PTIR), two novel methods that provide IR spectra with ≈500 and ≈10 nm spatial resolutions, respectively...

Medical textiles are one of the most rapidly growing parts of the technical textiles sector in the textile industry. This work aims to investigate the medical applications of a curcumin/TiO2 nanocomposite fabricated on the surface of cotton fabric. The cotton fabric was pretreated with three crosslinking agents, namely citric acid, 3-Chloro-2-hydroxypropyl trimethyl ammonium chloride (Quat 188) and 3-glycidyloxypropyltrimethoxysilane (GPTMS), by applying the nanocomposite to the modified cotton fabric using the pad-dry-cure method...

In this study, two-dimensional Ti3 C2 nanosheets were employed to improve the tribological and thermo-mechanical properties of epoxy resin. The Ti3 C2 nanosheets were prepared by ultrasound-assisted delamination of multilayered Ti3 C2 microparticles, and the Ti3 C2 nanosheets/epoxy (Ti3 C2 /epoxy) nanocomposites were fabricated through physical blending and curing reaction. Scanning electron microscopy results showed that the Ti3 C2 nanosheets were dispersed uniformly in the epoxy matrix. Tribological test results showed that the wear rate of Ti3 C2 /epoxy nanocomposites was only 6...

Simple preparation of flame-retardant, photoluminescent, and superhydrophobic smart nanocomposite coating was developed and applied onto cotton fibres using the simple pad-dry-cure technique. This novel strategy involved the immobilization of rare-earth-doped aluminium strontium oxide (ASO; SrAl2 O4 :Eu+2 ,Dy+3 ) nanoparticles, environmentally friendly room temperature vulcanizing silicone rubber (RTV) and environmentally friendly Exolet AP422 (Ex). The fabrics were also able to produce a char film in the fire-resistant assessment, providing fibres with a self-extinguishing characteristic...

The multifunctional combined nanoplatform has a wide application prospect in the synergistic treatment of cancer. Nevertheless, the traditional treatment of phototherapy is limited by the catalytic nanomaterial itself, so the effect is not satisfactory. Here, the arris of the anisotropic truncated octahedral Au (TOh Au) was coated with noble metal Pt to form a spatial separation structure, which enhanced the local surface plasmonic resonance and thus boosted the photocatalytic effect. In this system, the highly efficient photocatalysis provides a strong guarantee for oncotherapy...

Atomized spray plasma deposition (ASPD) provides a single-step, low-temperature, and dry approach for the preparation of high refractive index hybrid polymer or polymer-inorganic nanocomposite coatings. Refractive indices as high as 1.936 at 635 nm wavelength have been obtained for ASPD 4-bromostyrene/toluene-TiO2 nanocomposite layers containing low titania loadings. Thin films with any desired refractive index up to 1.936 can be easily deposited onto a variety of substrates by varying the precursor mixture composition...

Objectives : The objective of this study was to investigate the mechanical properties of high-impact (HI) heat-cured acrylic resin (PMMA) reinforced with silane-treated zirconia nanoparticles. Methods : Forty-five PMMA specimens reinforced with zirconia were fabricated and divided into three groups: Pure HI PMMA (control group), PMMA reinforced with 3 wt.% of non-silanised zirconia nanoparticles and PMMA reinforced with 3 wt.% of silanised zirconia nanoparticles. Silanised and non-silanised zirconia nanoparticles were analysed with Fourier Transform Infrared (FTIR) Spectroscopy...

Highly stable conducting fibers have attracted significant attention in electronic textile (e-textile) applications. Here, we fabricate highly conducting poly(vinyl alcohol) (PVA) nanocomposite fibers with high thermal and chemical stability based on silver nanobelt (AgNB)/multiwalled carbon nanotube (MWCNT) hybrid materials as conducting fillers. At 20 vol % AgNB/MWCNT, the electrical conductivity of the fiber dramatically increased (∼533 times) from 3 up to 1600 S/cm after thermal treatment at 300 °C for 5 min...

Bundling of single-walled carbon nanotubes (SWCNTs) significantly undermines their superior thermal and electrical properties. Realizing stable, homogeneous, and surfactant-free dispersion of SWCNTs in solvents and composites has long been regarded as a key challenge. Here, we report amine-containing aromatic and cyclohexane molecules, which are common chain extenders (CEs) for epoxy curing in industry, can be used to effectively disperse CNTs. We achieve single-tube-level dispersion of SWCNTs in CE solvents, as demonstrated by the strong chirality-dependent absorption and photoluminescence emission...

Epoxy nanocomposites with float catalysis-produced CNT felt as a filler were prepared. Parameters such as the curing process, glass transition of epoxynanocomposites, structure and morphology of CNT felt, initial epoxy composition, and epoxy nanocomposites were investigated. The influence of CNT felt on curing process in epoxy nanocomposites with different amounts of curing agent was determined. An exothermic reaction between the curing agent and the surface of CNTs was established. It was found that the structure of epoxy nanocomposites has a high degree of heterogeneity: the presence of fiber-like structures and individualized CNTs is observed together with the regions that are typical for CNTs that are fabricated via a catalytic chemical vapor deposition (CVD)...

Glycidyl methacrylate (GMA) and a mixture of alkyl methacrylates (average chain length of 13 carbons; termed C13MA; derived from vegetable oils) were copolymerized by nitroxide-mediated polymerization to form epoxidized statistical and block copolymers with similar compositions ( F GMA ∼0.8), which were further cross-linked by a bio-based diamine. Hybrid plate-like nanoparticles containing organophosphorus-titanium-silicon (PTS) with an average size of ∼130 nm and high decomposition temperature (485 °C) were synthesized via a hydrothermal reaction to serve as additives to simultaneously enhance the thermal and mechanical properties of the blend...