dental technician

INTRODUCTION: Shade matching is an essential procedure to obtain an esthetic prosthesis. The Direct Visual Shade Matching (DSM) method using shade guides is the most used method by dentists. However, The Indirect Visual Digital Shade Matching (ISM) method based on digital imaging is concerned to be reliable and useful in determining shade matching in dental practice. Several factors such as method, clinical experience, and gender can affect the success of shade matching. AIM OF THE STUDY: This study aimed to compare these two methods and evaluate the effect of experience and gender on the results...

BACKGROUND: The growing popularity of nail techniques based on acrylates has led to a higher frequency of sensitization in both nail technicians and users. OBJECTIVES: The study aimed to assess cases of allergic contact dermatitis (ACD) caused by acrylates in individuals with occupational or non-occupational exposure to nail techniques. METHODS: A preliminary study was conducted on 30 patients with ACD caused by acrylates in nail techniques, who were patch tested from September 2022 to March 2023 at the First Department of Dermatology and Venereology of Andreas Syggros Hospital, Athens, Greece...

OBJECTIVES: This study compared the tooth morphology, internal fit, occlusion, and proximal contacts of dental crowns automatically generated via two deep learning (DL)-based dental software systems with those manually designed by an experienced dental technician using conventional software. METHODS: Thirty partial arch scans of prepared posterior teeth were used. The crowns were designed using two DL-based methods (AA and AD) and a technician-based method (NC)...

Zirconia-reinforced lithium silicate (ZLS) ceramic is a new innovative dental material with unique a chemical composition that is designed to combine harmoniously with the appropriate optical properties of lithium disilicate and the enhanced mechanical strength of zirconia. A thorough understanding of ZLS materials is essential for both clinicians and dental technicians. At present, the mechanical behavior and optical properties of the ZLS ceramic system have not been extensively researched, and there is still a lack of consensus regarding the fabrication process and clinical behavior of ZLS all-ceramic restorations...

A technique is described for capturing relative dental implant positions for an implant-supported fixed prosthesis in a completely edentulous arch with a novel implant indexing apparatus that also functions as a scannable verification device. A series of intraoral scans are made to record the contours and occlusal records of the existing prosthetics and soft tissue. The individual scans are aligned by using a dental software program to design either an interim or definitive prosthesis. The technique reduces the time needed to gather the records dental laboratory technicians require to fabricate a complete arch implant-supported prosthesis...

BACKGROUND: Concerns regarding contact allergies and intolerance reactions to dental materials are widespread among patients. Development of novel dental materials and less frequent amalgam use may alter sensitization profiles in patients with possible contact allergy. OBJECTIVE: This study was aimed at analysing current sensitization patterns to dental materials in patients with suspected contact allergy. METHODS: This retrospective, multicentre analysis from the Information Network of Departments of Dermatology (IVDK) selected patients among 169,834 patients tested in 2005-2019, and registered with (i) an affected area of 'mouth' (and 'lips'/'perioral'), (ii) with the dental material in question belonging to three groups: dental filling materials, oral implants, or dentures or equivalents, and (iii) were patch-tested in parallel with the German baseline series, (dental) metal series, and dental technician series...

STATEMENT OF PROBLEM: The marginal fit of dental prostheses is a clinically significant issue, and dental computer-aided design software programs use automated methods to expedite the extraction of finish lines. The accuracy of these automated methods should be evaluated. PURPOSE: The purpose of this study was to compare the accuracy of a new hybrid method with existing software programs that extract finish lines using fully automated and semiautomated methods. MATERIAL AND METHODS: A total of 182 jaw scans containing at least 1 natural tooth abutment were collected and divided into 2 groups depending on how the digital data were created...

BACKGROUND: This study aims to evaluate the knowledge and the attitude in oral health (OH) of nurses (NUR) and auxiliary health technicians (AHT) belonging to the Long-term Care Units (LTC). METHODS: Observational cross-sectional study. A survey was applied in five MLTC in Porto (Portugal) to 145 healthcare works (HCW). Data were collected using structured questionnaires with questions about knowledge and attitude regarding oral care. Data analysis comparison was performed using non-parametric tests (α = 0...

PURPOSE: Many elastomeric impressions sent to commercial laboratory dental technicians may include marginal defects. To fabricate accurate restorations, digital technology may be used to merge digital files of defective impressions into a single standard tessellation language (STL) file free of errors. This would save clinicians and patients time and may improve clinical care. The purpose of this study was to compare the accuracy of digital master casts reconstructed from merged STL files of defective impressions with the file of the original defect-free preparations...

BACKGROUND: Effective and clear communication between the dentist and dental technician plays a vital role in rendering quality prostheses for patients. When fabricating a removable dental prosthesis, it is uncertain if the information received by the dental laboratory technician is clear and sufficient. This investigation aimed to assess dental technicians' perceptions of the quality of dentists' communication on the fabrication of removable partial dentures (RPDs) in Saudi Arabia. METHODOLOGY: After obtaining the institutional review board (IRB) approval from Riyadh Elm University, Riyadh, Saudi Arabia, a cross-sectional survey on a convenient sample of 115 dental technicians registered with the Saudi Commission for Health Specialties was conducted in January 2022...

Construction of an ocular or eye prosthesis can be challenging, as it is a cosmetic device. It needs good communication between dentists and maxillofacial technicians. The construction process normally requires multiple appointments, which involve at least four visits starting with ocular impression to insertion of the prosthesis. This article will outline the clinical step and propose a clinical technique to reduce the number of appointments from four to three appointments, which would benefit both the patient and practitioner...

PURPOSE: To investigate the current situation of dental technical personnel team in medical institutions in Shanghai, and to provide reference for the construction of dental technical discipline and development of dental personnel team in the National Center for Stomatology (Shanghai). METHODS: Random sample questionnaire and expert interviews were used to find out the awareness, satisfaction and improvement suggestions of dental technicians among physicians, nursing and medical technicians in medical institutions in Shanghai...

An alternative protocol is presented to design computer-aided design and computer-aided manufacturing (CAD-CAM) complete dentures and overdentures using a facially guided digital design. The facially guided design protocol with CAD-CAM facilitated communication between the clinician and dental laboratory technician. A monolithic denture and overdenture were fabricated guided by preliminary dentures with 3-dimensionally (3D) printed denture bases and milled wax teeth.

STATEMENT OF PROBLEM: The union of the metal removable partial denture framework to the heat polymerized acrylic resin is related to prosthesis longevity. However, methods to enhance this bond are not clear to clinicians and dental laboratory technicians. PURPOSE: The purpose of this systematic review was to identify which metal surface treatments best increase the bond strength between heat polymerized acrylic resin and removable partial denture alloys. MATERIAL AND METHODS: This review was carried out following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and registered in the International Prospective Registry of Systematic Reviews (PROSPERO) database (CRD42022384926)...

BACKGROUND: Work of a dental technician is associated with exposure to a number of harmful factors. We can distinguish: chemical, biological, physical and psychophysical factors. They contribute to many diseases, but not all of them are classified as occupational diseases. The main aim of the study was to assess the health hazards that occur in the workplace of a dental technician and their prevention during the COVID-19 pandemic. MATERIAL AND METHODS: An epidemiological cross-sectional study was conducted...

OBJECTIVE: This article highlights the feasibility of the additive fabrication of ultra-thin veneers made of lithium disilicate using the lithography-based ceramic manufacturing (LCM) method. CLINICAL CONSIDERATIONS: An esthetical appealing restoration of anterior teeth with thin ceramic veneers is considered one of the ultimate challenges in restorative dental prosthetics. These sophisticated restorations can be fabricated in different ways. Both analog and digital subtractive manufacturing processes have been used to date...

OBJECTIVE: to analyze the risk of exposure to occupational stress among primary healthcare professionals during the COVID-19 pandemic and their perception regarding their experience. METHOD: mixed-methods sequential explanatory study with 50 primary care professionals. Sociodemographic, clinical, and labor questionnaires, Job Stress Scale, and semi-structured interviews were used. Quantitative data were submitted to descriptive and analytical statistical analysis; qualitative data were submitted to Thematic Content Analysis...

Physiological natural tooth displacement under occlusal loading can influence intraoral occlusal contacts. However, gypsum casts and digital scans cannot simulate the physiological tooth displacement under occlusal loading. The occlusal design of the implant-supported crowns has been based mainly on the experience of dental laboratory technicians, lacking accuracy and individualization. Therefore, a digital technique that considers physiological tooth displacement is presented to design the occlusion of implant-supported single crowns...

OBJECTIVES: Evaluation of cumulative survival and complication rate of monolithic lithium disilicate inlays and partial crowns performed by supervised undergraduate students up to 8.3 years of clinical service. MATERIALS AND METHODS: In this retrospective clinical study 143 lithium disilicate posterior restorations (IPS e.max Press) were examined according to the FDI criteria. A standardised questionnaire was used to determine patient satisfaction. The aesthetic outcome was evaluated by dentists and dental technicians using intraoral photographs...

BACKGROUND: Dental panoramic imaging plays a pivotal role in dentistry for diagnosis and treatment planning. However, correctly positioning patients can be challenging for technicians due to the complexity of the imaging equipment and variations in patient anatomy, leading to positioning errors. These errors can compromise image quality and potentially result in misdiagnoses. OBJECTIVE: This research aims to develop and validate a deep learning model capable of accurately and efficiently identifying multiple positioning errors in dental panoramic imaging...