CAD/CAM

INTRODUCTION: Both the population's average life expectancy and the number of patients without teeth are rising. A 2012 epidemiological survey in India found that 30% of the population is edentulous. The rehabilitation process with a set of removable maxillary and mandibular complete dentures is the standard treatment for patients who are edentulous. This study is the first to incorporate and compare a novel approach to a single implant-retained mandibular overdenture with a bar attachment fabricated by CAD-CAM and a casting process on a single implant in the symphysis region...

INTRODUCTION: Dentures aim to replicate natural dentition's esthetics and functions as much as possible. With computer-aided design/computer-aided manufacturing (CAD/CAM) technology, dentistry had a new renaissance with workflow and materials. AIM: The aim is to compare the fracture toughness of the milled, 3D-printed, and conventional polymethyl methacrylate (PMMA) to those processed conventionally. MATERIALS AND METHODS: 10 CAD MILLED PMMA BLOCKS, 10 3D PRINTED PMMA BLOCKS, and 10 CONVENTIONAL (HEAT CURE) PMMA BLOCKS...

AIM: This study aimed to evaluate the clinical efficacy of posterior resin implant-supported fixed partial dentures (FPDs) made from two different computer-aided design and computer-aided manufacturing (CAD-CAM) materials: polymethylmethacrylate (PMMA) and polyoxymethylene (POM). MATERIALS AND METHODS: Twenty-one patients received a total of 49 interim implant-supported FPDs. The same participant received PMMA and POM as part of the control and experimental groups, respectively...

OBJECTIVES: This study compares the bacterial susceptibility to three different provisional restorations manufactured with different laboratory techniques, i.e., heat cure, CAD/CAM, and 3D printing. MATERIALS AND METHODS: Totally, 45 health patients with age group of 30-60 years undergoing complete veneer crown treatment were selected for the study and divided into three groups with 15 samples in each as Group I: the crowns were made from polymethyl methacrylate polymer fabricated by the conventional heat cure method, Group 2: the crowns were made from polymethyl methacrylate fabricated by subtractive manufacturing CAD/CAM method, and Group 3: the crowns were made from oligomers fabricated by additive manufacturing 3D printing...

Background: Digital technologies enable the accurate replication of occlusion, which is pivotal for stability in maximum intercuspation and dynamic occlusion. CAD softwares generates standardized occlusal morphologies requiring significant adjustments. The consideration of individual mandibular movements during restoration leads to better functional integration. This pilot study evaluates the efficacy of a novel, fully digital protocol for occlusal analysis recording in prosthodontics. Methods: Patients needing single or multiple metal-free restorations were included...

PURPOSE: The composition and properties of resin-based composite materials could affect tooth wear and lead to clinical problems. Therefore, the study objective was to characterize human tooth wear behavior against a bulk-fill restorative (BF) compared to a conventional resin composite (RC) and a CAD/CAM resin nano ceramic (RN). METHODS: Square-shaped specimens of each material were prepared and sub-divided according to the number of testing cycles (n=8): 100,000, 250,000, and 500,000 cycles...

OBJECTIVES: In-office and lab milled prostheses are the staple for indirect restorations. It is therefore critical to determine their long-term bonding durability. METHODS: CAD/ CAM blocks of two classes of restorative materials: 1) a nano-ceramic reinforced polymer matrix (NCPM) and, 2) a polymer-infiltrated ceramic network (PICN) were bonded using four different universal adhesives (UA) and silane systems. A lithium disilicate glassceramic (LDS) was used as a reference...

STATEMENT OF PROBLEM: New-generation denture base materials are used successfully in denture fabrication; however, the effect of saliva pH change on the color stability of materials is unknown. PURPOSE: The purpose of this in vitro study is to evaluate the color stability of new-generation denture base materials after immersion in artificial saliva with different pH values (3,7,14). MATERIAL AND METHODS: Disc-shaped samples (Ø 10 mm x 2 mm) were prepared from three different denture base materials (1 pre-polymerized polymethylmethacrylate [PMMA], 1 graphene-reinforced PMMA, and heat-cure polymethyl methacrylate resin) (n=10)...

PURPOSE: The aim of this study was to compare and assess the stress distribution and failure possibility of endodontically treated central incisor protected with endocrowns with different heights, with various CAD-CAM blocks such as IPS e.max CAD, Katana Zirconia, and Zolid Fx Zirconia. MATERIALS AND METHODS: A root canal-treated central incisor (plastic model) restored with an endocrown was scanned with a laser scanner to prepare a control model with a CAD software and then transferred to an FEA software...

To assess color and translucency change (∆E00 and ∆TP) of 3D-printed (Varseosmile crown plus, VS) and milled resin-ceramic hybrid material (Cerasmart, CS) compared to enamel (E) when immersed in distilled water (DW) and coffee (C). Sixty VS, CS, and E specimens were immersed in DW and C for 30 days. Statistics analysis using t-test and one-way ANOVA at p≤0.05. ∆E00 of VS, CS, and E significantly increased when immersed in coffee (p<0.001, p<0.001 and p=0.01, respectively). E has more ∆E00 than VS and CS (p<0...

This report describes the bone reduction guide which was digitally obtained to improve diagnosis, treatment outcome and follow-up. Treatment of gingival smiles due to altered passive eruption should include interdisciplinary planning and smile design to facilitate the prediction of treatment outcome. Crown lengthening surgery can be supported by digital tools to improve surgical planning and follow-up. A 30-year-old female patient was referred to a private dental clinic seeking solutions for her gingival smile...

BACKGROUND: Endothelial inflammation may be involved in the pathogenesis of schizophrenia, and cellular adhesion molecules (CAMs) on endothelial cells may facilitate leukocyte binding and transendothelial migration of cells and inflammatory factors. The aim of the present study was to assess levels of soluble cellular adhesion molecules, including intercellular adhesion molecule (ICAM)-1, vascular adhesion molecule (VCAM)-1, mucosal addressin cell adhesion molecule (MADCAM), junctional adhesion molecule (JAM-A) and neural cadherin (N-CAD) in patients with schizophrenia compared to healthy controls...

BACKGROUND: Children with dental caries are treated with stainless steel metal crowns (SSC), but the aesthetics and precision still need to be improved. Currently, both 3D-printed resin crowns (PRC) and computer-aided design/computer-aided manufacture (CAD/CAM) resin crowns (CRC) meet the clinical requirements for crown applications in terms of strength, production time, cost, and aesthetics. AIM: This study replaced SSC with customized resin crowns by 3D printing and CAD/CAM...

INTRODUCTION: Custom insoles are a routine treatment for many foot pathologies, and the use of computer-aided design and computer-aided manufacturing (CAD/CAM) is well established within clinical practice in the UK. The method of foot shape capture used to produce insoles varies throughout orthotic services. This trial aims to investigate the effectiveness of two common shape-capture techniques on patient-reported outcomes in people who require insoles for a foot or ankle pathology. METHODS AND ANALYSIS: This double-blinded randomised controlled trial will involve two intervention groups recruited from a National Health Service orthotic service...

The purpose of this technical report is to demonstrate a fully digital workflow for designing and fabricating metal frameworks and removable partial dentures. After obtaining a digital cast of the dental arch with bilateral distal extension defect, computer-aided design software and 3D printing technology are used for the design and fabrication of the removable partial denture frameworks, denture teeth, and denture bases, instead of the traditional workflow. The assembly of the three components is facilitated through a meticulously structured framework...

Squamous cell carcinoma is a common malignant condition affecting the oral cavity and may involve the surrounding maxillofacial regions. Treatment commonly involves resection of the tumor, followed by prosthetic rehabilitation of the resection defect. This clinical report presents a 62-year-old Asian male patient who had previously undergone surgical resection, resulting in a post-surgical Aramany Class II maxillary defect. The patient's medical history included severe trismus, characterized by restricted mouth opening, as well as a diagnosis of maxillary sinus verrucous squamous cell carcinoma...

High-quality impressions and accurate occlusal relationship records are essential for the success of complete dentures. A custom impression tray and interim complete denture base fabricated by computer-aided design and computer-aided manufacturing (CAD-CAM) are introduced, enhancing the ability to obtain precise definitive impressions and accurate jaw relation records and improving complete denture treatment.

OBJECTIVE: Occlusal reconstruction is a critical intervention for patients with dental hard tissue defects, temporomandibular joint (TMJ) disorders, and jaw position abnormalities. Clinical efficiency and outcomes of these procedures have improved with advances in digital technologies. This case report aims to illustrate a comprehensive digital workflow for occlusal reconstruction in a patient with congenital dentition defects, emphasizing the application of digital technologies to enhance treatment outcomes...

In the field of removable prosthodontics, computer-aided design and computer-aided manufacturing (CAD/CAM) have become widely recognized. The traditional method, which uses heat-polymerized resins for injection or compression molding, necessitates up to five patient visits and laborious laboratory processes. A digital workflow combined with a CAD/CAM methodology can provide prompt prosthesis delivery for patients with time constraints. This article's goal is to outline the steps and the limitations in the fabrication of digital dentures as well as the challenges, limitations, and solutions developed while developing a clinical workflow for the rehabilitation of completely edentulous patients with the CAD/CAM System...

Children with dentinogenesis imperfecta require restorative or prosthodontic treatment to minimize the aesthetic and functional impact of the condition. This clinical case report describes the oral rehabilitation procedure in a 12-year-old patient with dentinogenesis imperfecta type II using nanoceramic resin crowns fabricated with Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) technology and the patient's progression over eight years. This minimal intervention approach enabled functional and aesthetic reestablishment along with tooth wear prevention...