aluminium

This research investigated the suitability of using sludge from the treatment of drinking water in hot mix asphalt (HMA) as a filler material. The storage and environmental impact of sludge is an enormous problem, especially for countries with large populations. Two different types of sludges, ferric chloride (FC) and aluminium sulphate (AS), were used as a filler material in HMA. The Hamburg Wheel Tracking (HWT) test, which correlates with rutting, and the Indirect Tensile Strength (ITS) test, which indicates the moisture sensitivity of HMA, were carried out at the optimum bitumen content of the mixes to investigate the usability of sludge in HMA...

BACKGROUND QUERCUS: seeds that are recalcitrant to desiccation and freezing temperatures cannot be stored in gene banks under conventional conditions. However, the germplasm of some recalcitrant seeded species can be stored in liquid nitrogen (-196 °C). Unfortunately, for many species, among them for almost the whole genus Quercus, an effective cryostorage method is still unknown. In this study, we propose a successful cryostorage protocol for Quercus petraea (Matt.) Liebl. germplasm using plumules (a shoot apical meristem of an embryo) frozen on aluminium cryo-plates...

BACKGROUND: This study assessed the effect of corticotomy with Er: YAG (erbium-doped yttrium aluminium garnet) laser on the rate of canine retraction. METHODS: This randomized split-mouth controlled clinical trial was conducted on 12 patients undergoing orthodontic treatment with extraction of maxillary first premolars. Following initial leveling and alignment, an alginate impression was made from the maxillary arch, and Er: YAG laser corticotomy was performed in one of the maxillary quadrants of each patient...

The reactivity of B3 N3 -doped hexa-cata-hexabenzocoronene (B3 N3 -NG), Al3 N3 -NG, B3 P3 -NG and Al3 P3 -NG, models of doped nanographenes (NGs), towards carbon dioxide was studied with density functional theory (DFT) calculations at the M06-2X/6-311++G(3df,3pd)//M06-2X/6-31+G* level of theory. The NG systems exhibit a poly-cyclic poly-frustrated Lewis pair (FLP) nature, featuring multiple Lewis acid/Lewis base pairs on their surface enabling the capture of several CO2 molecules. The capture of CO2 by these systems was investigated within two scenarios: (A) sequential capture of up to three CO2 molecules and (B) capture of CO2 molecules in the presence of a sodium cation...

This work presents observations of symmetry breakages in the intensity distributions of near-zone-axis convergent-beam electron diffraction (CBED) patterns that can only be explained by the symmetry of the specimen and not the symmetry of the unit cell describing the atomic structure of the material. The specimen is an aluminium-copper-tin alloy containing voids many tens of nanometres in size within continuous single crystals of the aluminium host matrix. Several CBED patterns where the incident beam enters and exits parallel void facets without the incident beam being perpendicular to these facets are examined...

In the field of quantitative X-ray analysis techniques, such as electron probe microanalysis, precise knowledge of fundamental parameters is crucial. Especially, the accurate determination of photon mass attenuation coefficients is essential to perform correct elemental quantification. While the widely used databases offer agreement for the hard X-ray range, significant differences arise for lower photon energies. Furthermore, addressing the uncertainties of the tabulated data, which can be of several hundreds of percent, is of urgent need...

Aluminium, the third most abundant element in the earth's crust, was long considered virtually innocuous to humans but has gained importance in the recent past. Aluminium is ubiquitous in the environment, with various sources of exposure like cosmetics, the food industry, occupational industries, the medical field, transport and electronics. Aluminium finds its utility in various aspects of dermatology as an effective haemostatic agent, anti-perspirant and astringent. Aluminium has a pivotal role to play in wound healing, calciphylaxis, photodynamic therapy and vaccine immunotherapy with diagnostic importance in Finn chamber patch testing and confocal microscopy...

The advancement of non-Newtonian nanofluid innovation is a crucial area of research for physicists, mathematicians, manufacturers, and materials scientists. In engineering and industries, the fluid velocity caused by rotating device and nanofluid has a lot of applications such as refrigerators, chips, heat ex-changers, hybrid mechanical motors, food development, and so on. Due to the tremendous usage of the non-Newtonian nanofluid, the originality of the current study is to explore the influence of nanoparticle radii and inter-particle spacing effects on the flow characteristics of Casson Methanol-based Aluminium alloy $(AA7072)$ nanofluid through a rotating disc with Joule heating and magnetic dipole...

Relatively little is known about the relationship between socio-demographic factors and the chemical exposome in adolescent populations. This knowledge gap hampers global efforts to meet certain UN sustainability goals. The present work addresses this problem in Swedish adolescents by discerning patterns within the chemical exposome and identify demographic groups susceptible to heightened exposures. Enlisting the Riksmaten Adolescents 2016-17 (RMA) study population (N = 1082) in human-biomonitoring, and using proportional odds ordinal logistic regression models, we examined the associations between concentrations of a diverse array of substances (N = 63) with the determinants: gender, age, participant/maternal birth country income per capita level, parental education levels, and geographic place of living (longitude/latitude)...

The development of lightweight and durable materials for car body panels and load-bearing elements in the automotive industry results from the constant desire to reduce fuel consumption without reducing vehicle performance. The investigations mainly concern the use of these alloys in the automotive industry, which is characterised by mass production series. Increasing the share of lightweight metals in the entire structure is part of the effort to reduce fuel consumption and carbon dioxide emissions into the atmosphere...

The increase in greenhouse gas emissions has led to seawater acidification, increasing the corrosion rate of metal structures in marine applications. This paper indicates that the spraying of four types of coatings, namely Zn, Al, Zn-Al, and Al-Mg, using the arc-spraying technique on steel substrate S235JR, creates effective protective coatings that interact differently with various pH solutions exposed to varying levels of seawater acidification. The study analyses the structural properties of the coating materials using SEM and XRD techniques...

C-H metalation is the most efficient method to prepare aryl-zinc and -aluminium complexes that are ubiquitous nucleophiles. Virtually all C-H metalation routes to form Al/Zn organometallics require stoichiometric, strong Brønsted bases with no base-catalyzed reactions reported. Herein we present a catalytic in amine/ammonium salt (Et3N/[(Et3N)H]+) C-H metalation process to form aryl-zinc and aryl-aluminium complexes. Key to this approach is coupling an endergonic C-H metalation step with a sufficiently exergonic dehydrocoupling step between the ammonium salt by-product of C-H metalation ([(Et3N)H]+) and a Zn-H or Al-Me containing complex...

The toxicological effect between co-existed antibiotics and metal ions was dangerous to the ecological environment and public health. However, the rapid quantification tools with convenience, accuracy and low cost for the detection of multiple targets were still challenging. Herein, a portable tri-color ratiometric fluorescence paper sensor was constructed by coupling of blue carbon dots and fluorescence imprinted polymer for down/up conversion simultaneous detection of tetracycline and sulfamethazine. Interestingly, the cascade detection of aluminum ion was also realized based on the individual detection system of tetracycline without the assistance of complex coupling reagents...

The development of the solar market has been fast in the past decades, and the number of photovoltaic module installations is large. The photovoltaic modules have a lifetime of about 25 years and need recovery after that. The aluminium-back surface field (Al-BSF) module is the first kind of large-scale installed module and will come to its end of life in the next few years. The recycling of silicon material in the Al-BSF module is investigated in this work. The components of the module are separated, and the silicon material in the module is collected and then purified by (aluminium-silicon) Al-Si solvent refining for reuse...

INTRODUCTION: A study on the quality of drinking water was conducted at Air Kuning Treatment Plant In Perak, Malaysia, based on a sanitary survey in 14 sampling points stations from the intake area to the auxiliary points. This was to ensure the continuous supply of clean and safe drinking water to the consumers for public health protection. The objective was to examine the physical, microbiological, and chemical parameters of the water, classification at each site based on National Drinking Water Standards (NDWQS) and to understand the spatial variation using environmetric technique; principal component analysis (PCA)...

Calabash chalk (CaC) is an aluminium silicate hydroxide compound with heavy metal constituents, making it a potential neurotoxicant. Pregnant women often consume CaC as an antiemetic, which may interfere with the normal development of the foetal brain. Here, we evaluated the effects of CaC administration in pregnant rats on the brain of the offspring. Wistar rat dams were assigned to one of three groups: control, 200 mg/kg and 800 mg/kg of a CaC suspension. Administrations lasted 14 days (gestation days 7-20)...

Magnesium Potassium Phosphate Cements (MKPCs) are considered a good alternative for the immobilization of aluminium radioactive waste. MKPC composition and moisture curing conditions are relevant issues to be evaluated. The corrosion of pure aluminium (A1050) and AlMg alloys (AA5754) with 3.5% of Mg is studied in MKPC systems prepared with different MgO/KH2 PO4 (M/P) molar ratios (1, 2, and 3M) and moisture curing conditions (100% Relative Humidity (RH) and isolated in plastic containers (endogenous curing))...

The homoleptic magnesium bis(aluminyl) compound Mg[Al(NON)]2 (NON = 4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl -9,9-dimethylxanthene) can be accessed from K2[Al(NON)]2 and MgI2 and shown to possess a non-linear geometry (ÐAl-Mg-Al = 164.8(1)°) primarily due to the influence of dispersion interactions. This compound acts a four-electron reservoir in the reductive de-fluorination of SF6, and reacts thermally with polar substrates such as MeI via nucleophilic attack through aluminium, consistent with the QT-AIM charges calculated for the metal centres, and a formal description as a Al(I)-Mg(II)-Al(I) trimetallic...

AIM: This article describes the use of graphite(Gr) and boron carbide (B4C) as multiple nanoparticle reinforcements in LM25 aluminum alloy. Because boron carbide naturally absorbs neutron radiation, aluminium alloy reinforced with boron carbide metal matrix composite has gained interest in nuclear shielding applications. The primary goal of the endeavor is to create composite materials with high wear resistance, high microhardness, and high ultimate tensile strength for use in nuclear applications...

Cost-effective treatment or even valorization of the bauxite residue (red mud) from the alumina industry is in demand to improve their environmental and economic liabilities. This study proposes a strategy that provides a near-complete conversion of bauxite residue to valuable products. The first step involves dilute acid leaching, which allowed the fractionation of raw residues into (1) an aqueous fraction rich in silica and aluminium and (2) a solid residue rich in iron, titanium and rare earth elements. For the proposed process, 91% of the original silicon, 67% of the aluminium, 78% of the scandium and 69% of the cerium were recovered...