lithium carbonate

In this study, walnut shell (WS) was used as feedstock, incorporating lithium carbonate (LC), sodium carbonate (SC), potassium carbonate (PC), and potassium hydroxide (PH) as pyrolysis catalysts and carbonization activators. A one-step method that allows catalytic pyrolysis and carbonization to be carried out consecutively under their respective optimal conditions is employed, enabling the concurrent production of high-quality pyrolysis oil, pyrolysis gas, and carbon materials from biomass conversion. The effects of LC, SC, PC, and PH on the yield and properties of products derived from WS pyrolysis as well as on the properties and performance of the resulting carbon materials were examined...

Lithium-ion battery electrodes are typically manufactured via slurry casting, which involves mixing active material particles, conductive carbon, and a polymeric binder in a solvent, followed by casting and drying the coating on current collectors (Al or Cu). These electrodes are functional but still limited in terms of pore network percolation, electronic connectivity, and mechanical stability, leading to poor electron/ion conductivities and mechanical integrity upon cycling, which result in battery degradation...

A sustainable society requires high-energy storage devices characterized by lightness, compactness, a long life and superior safety, surpassing current battery and supercapacitor technologies. Single-walled carbon nanotubes (SWCNTs), which typically exhibit great toughness, have emerged as promising candidates for innovative energy storage solutions. Here we produced SWCNT ropes wrapped in thermoplastic polyurethane elastomers, and demonstrated experimentally that a twisted rope composed of these SWCNTs possesses the remarkable ability to reversibly store nanomechanical energy...

Due to the rapid increase in the number of spent lithium-ion batteries, there has been a growing interest in the recovery of degraded graphite. In this work, a rapid thermal shock (RTS) strategy is proposed to regenerate spent graphite for use in lithium-ion batteries. The results of structural and morphological characterization demonstrate that the graphite is well regenerated by the RTS process. Additionally, an amorphous carbon layer forms and coats onto the surface of the graphite, contributing to excellent rate performance...

Lithium (Li) metal batteries (LMBs) with nickel (Ni)-rich layered oxide cathodes exhibit twice the energy density of conventional Li-ion batteries. However, their lifespan is limited by severe side reactions caused by high electrode reactivity. Fluorinated solvent-based electrolytes can address this challenge, but they pose environmental and biological hazards. This work reports on the molecular engineering of fluorine (F)-free ethers to mitigate electrode surface reactivity in high-voltage Ni-rich LMBs. By merely extending the alkyl chains of traditional ethers, we effectively reduce the catalytic reactivity of the cathode towards the electrolyte at high voltages, which suppresses the oxidation decomposition of the electrolyte, microstructural defects and rock-salt phase formation in the cathode, and gas release issues...

Cost-effective and environmentally friendly Fe-based active materials offer exceptionally high energy capacity in lithium-ion batteries (LIBs) due to their multiple electron redox reactions. However, challenges, such as morphology degradation during cycling, cell pulverization, and electrochemical stability, have hindered their widespread use. Herein, we demonstrated a simple salt-assisted freeze-drying method to design a double-shelled Fe/Fe3 C core tightly anchored on a porous carbon framework (FEC). The shell consists of a thin Fe3 O4 layer (≈2 nm) and a carbon layer (≈10 nm) on the outermost part...

Ethyl methyl carbonate (EMC) is a crucial solvent extensively utilized in lithium-ion battery electrolytes; the transesterification of dimethyl carbonate (DMC) with ethanol is a pivotal reaction for EMC production. However, this reaction faces challenges due to the trade-off between catalytic activity and selectivity from the basic catalysts. In this issue, we report an innovative strategy through fine-tuning the electron-donor capability of the basic phenolate anion ([PhO]) in a novel poly(ionic liquid) (PIL) framework, as synthesized via an alkylation reaction between 1,3,5-tris(bromomethyl)benzene, biphenyldiimidazole, and N , N '-carbonyldiimidazole (CDI) to trigger targeted basicity that can directionally catalyze the transesterification of DMC with ethanol, so as to achieve both ultrahigh catalytic activity and selectivity toward EMC...

Transition metal oxides (TMOs) are highly dense in energy and considered as promising anode materials for a new generation of alkaline ion batteries. However, their electrode structure is disrupted due to significant volume changes during charging and discharging, resulting in the short cycle life of batteries. In this paper, the hierarchical Ni3V2O8@N-doped carbon (Ni3V2O8@NC) hollow double-shell microspheres were prepared and used as electrode materials for lithium-ion batteries (LIBs). The utilization efficiency and ion transfer rate of Ni3V2O8 were improved by the hollow microsphere structure formed through nanoparticle self-assembly...

Commonly-used ether and carbonate electrolytes show distinct advantages in active lithium-metal anode and high-voltage cathode, respectively. While these complementary characteristics hold promise for energy-dense lithium metal batteries, such synergy cannot be realized solely through physical blending. Herein, a linear functionalized solvent, bis(2-methoxyethyl) carbonate (BMC), is conceived by intramolecularly hybridizing ethers and carbonates. The integration of the electron-donating ether group with the electron-withdrawing carbonate group can rationalizes the charge distribution, imparting BMC with notable oxidative/reductive stability and relatively weak solvation ability...

Sulfurized polyacrylonitrile (SPAN) is a promising cathode material for lithium-sulfur (Li-S) batteries due to its significantly reduced polysulfide (PS) dissolution compared to that of elemental S cathodes. Although conventional carbonate-based electrolytes are stable with SPAN electrodes, they are unstable with Li metal anodes. Recently, localized high-concentration electrolytes (LHCEs) have been developed to improve the stability of Li anodes. Here, we report a new strategy to further improve the performance of Li||SPAN batteries by replacing the conventional solvating solvent 1,2-dimethoxyethane (DME) in LHCEs with a new solvating solvent, 1,2-diethoxyethane (DEE)...

Lithium-carbon dioxide (Li-CO2 ) batteries offer the possibility of synchronous implementation of carbon neutrality and the development of advanced energy storage devices. The exploration of low-cost and efficient cathode catalysts is key to the improvement of Li-CO2 batteries. Herein, high-entropy alloys (HEAs)@C hierarchical nanosheet is synthesized from the simulation of the recycling solution of waste batteries to construct a cathode for the first time. Owing to the excellent electrical conductivity of the carbon material, the unique high-entropy effect of the HEAs, and the large number of catalytically active sites exposed by the hierarchical structure, the FeCoNiMnCuAl@C-based battery exhibits a superior discharge capability of 27664 mAh g-1 and outstanding durability of 134 cycles as well as low overpotential with 1...

Recently, hydrogen boride (HB) with a pseudo-two-dimensional sheet structure was successfully synthesized, and it is theoretically predicted to have high potential as a negative electrode material for alkali metal ion batteries, making it a promising new candidate. This study represents the first experimental examination of the negative electrode properties of HB. HB was synthesized via cation exchange from MgB2 . The confirmation of HB synthesis was achieved through various spectroscopic experiments, including synchrotron radiation X-ray diffraction and X-ray photoelectron spectroscopy, in addition to direct observation using transmission electron microscopy...

Protection of lithium (Li) metal electrode is a core challenge for all-solid-state Li metal batteries (ASSLMBs). Carbon materials with variant structures have shown great effect of Li protection in liquid electrolytes, however, can accelerate the solid-state electrolyte (SE) decomposition owing to the high electronic conductivity, seriously limiting their application in ASSLMBs. Here, a novel strategy is proposed to tailor the carbon materials for efficient Li protection in ASSLMBs, by in situ forming a rational niobium-based Li-rich disordered rock salt (DRS) shell on the carbon materials, providing a favorable percolating Li+ diffusion network for speeding the carbon lithiation, and enabling simultaneously improved lithiophilicity and reduced electronic conductivity of the carbon structure at deep lithiation state...

Lithium iodide is commonly used in the production of batteries and drugs. Currently, the neutralization method is the primary means of producing lithium iodide. This method involves using hydriodic acid as a raw material, adding lithium carbonate or lithium hydroxide, and obtaining lithium iodide through evaporation and concentration. However, hydriodic acid is chemically unstable. Its preparation can lead to explosive accidents and encountering high temperatures generates toxic iodine vapors. These limitations restrict its industrial production...

The suitability of biocarbons derived from blackberry seeds as anode materials in lithium-ion batteries has been assessed for the first time. Blackberry seeds have antibacterial, anticancer, antidysentery, antidiabetic, antidiarrheal, and potent antioxidant properties and are generally used for herbal medical purposes. Carbon is extracted from blackberries using a straightforward carbonization technique and activated with KOH at temperatures 700, 800, and 900 °C. The physical characterization demonstrates that activated blackberry seeds-derived carbon at 900 °C (ABBSC-900 °C) have well-ordered graphene sheets with high defects compared to the ABBSC-700 °C and ABBSC-800 °C...

Bipolar affective disorder refers to a category of mood disorders characterized clinically by the presence of both manic or hypomanic episodes and depressive episodes. Lithium stands out as the primary pharmacological intervention for managing bipolar affective disorder. However, its therapeutic dosage closely approaches toxic levels. Toxic symptoms appear when the blood lithium concentration surpasses 1.4 mmol/L, typically giving rise to gastrointestinal and central nervous system reactions. Cardiac toxicity is rare but serious in cases of lithium poisoning...

Tailoring the omnidirectional conductivity networks in nickel oxide-based electrodes is important for ensuring their long lifespan, stability, high capacity, and high-rate capability. In this study, nickel metal nanoparticles and a three-dimensional nitrogen-doped carbon matrix were used to embellish the nickel oxide composite NiO-Ni/N-C via simplified hard templating. When a porous nitrogen-doped carbon matrix is present, a rapid pathway would be established for charging and discharging the electrons and lithium ions in a lithium-ion battery, thereby alleviating the volumetric expansion of the NiO nanoparticles during the operation of the battery...

The development of highly producible and interfacial compatible in-situ polymerized electrolytes for solid-state lithium metal batteries (SSLMBs) have been plagued by insufficient transport kinetics and uncontrollable dendrite propagation. Herein, we seek to explore a rationally designed nanofiber architecture to balance all the criteria of SSLMBs, in which La0.6Sr0.4CoO3-δ (LSC) enriched with high valence-state Co species and oxygen vacancies is developed as electronically conductive nanofillers embedded within ZnO/Zn3N2-functionalized polyimide (Zn-PI) nanofiber framework for the first time, to establish Li+ transport highways for poly vinylene carbonate (PVC) electrolyte and eliminate nonuniform Li deposits...

Quasi-solid polymer electrolyte (QPE) lithium (Li)-metal battery holds significant promise in the application of high-energy-density batteries, yet it suffers from low ionic conductivity and poor oxidation stability. Herein, a novel self-built electric field (SBEF) strategy is proposed to enhance Li+ transportation and accelerate the degradation dynamics of carbon-fluorine bond cleavage in LiTFSI by optimizing the termination of MXene. Among them, the SBEF induced by dielectric Nb4C3F2 MXene effectively constructs highly conductive LiF-enriched SEI and CEI stable interfaces, moreover, enhances the electrochemical performance of the QPE...

The increasing global market size of high-energy storage devices due to the boom in electric vehicles and portable electronics has caused the battery industry to produce a lot of waste lithium-ion batteries. The liberation and de-agglomeration of cathode material are the necessary procedures to improve the recycling derived from spent lithium-ion batteries, as well as enabling the direct recycling pathway. In this study, the supercritical (SC) CO2 was innovatively adapted to enable the recycling of spent lithium-ion batteries (LIBs) based on facilitating the interaction with a binder and dimethyl sulfoxide (DMSO) co-solvent...