ACS Omega

Flavor esters are organic compounds widely used in the food industry to enhance the aroma and taste of products. However, most chemical processes for the production of these flavoring compounds use toxic organic solvents. Some organic solvents derived from petroleum can leave behind residual traces in food products, which may raise concerns about potential health risks and contamination. In this study, we employ Eversa Transform 2.0, a commercial lipase derived from the lipase from Thermomyces lanuginosus , to produce geranyl butyrate in aqueous media...

A new graphene oxide (GO) nanocomposite that contains chitosan, a biological polymer, combined with a magnetic nanoparticle inorganic material (Fe3 O4 ) was successfully prepared and applied for the adsorption of Pb(II) from aqueous solutions. The structural and morphological properties of the GO/Fe3 O4 /CS (GFC) nanocomposites were characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Influent factors for Pb(II) adsorption, including the contacting time, pH of the working medium, working temperature, and adsorbent dosage on the adsorption efficiency, have been optimized...

Breast cancer (BC) persists as the predominant malignancy globally, standing as the foremost cause of cancer-related mortality among women. Despite notable advancements in prevention and treatment, encompassing the incorporation of targeted immunotherapies, a continued imperative exists for the development of innovative methodologies. These methodologies would facilitate the identification of women at heightened risk, enhance the optimization of therapeutic approaches, and enable the vigilant monitoring of emergent treatment resistance...

In order to discover novel compounds with excellent agricultural activities, novel flavonol derivatives containing 1,3,4-thiadiazole were synthesized and evaluated for their antifungal activities. The bioassay results showed that some of the target compounds had good antifungal activities against Botrytis cinerea , Phomopsis sp. and Sclerotinia sclerotiorum in vitro. It is worth noting that the half-effective concentration (EC50 ) value of Y18 against B. cinerea was 2.4 μg/mL, which was obviously superior to that of azoxystrobin (21...

In this work, we report the direct electrochemical oxidation of fentanyl using commercial screen-printed carbon electrodes (SPCEs) modified with carboxyl-functionalized carbon nanofibers (fCNFs). CNFs have surface chemistry and reactivity similar to carbon nanotubes (CNTs), yet they are easier to produce and are of a lower cost than CNTs. By monitoring the current produced during the electrochemical oxidation of fentanyl, variables such as fCNF loading, fentanyl accumulation time, electrolyte pH, and differential pulse voltammetry parameters were optimized...

Molten salts are highly effective as a quenching medium for austempering and martempering processes, enabling precise control of cooling rates to achieve the desired microstructures and mechanical characteristics in steel components. One such promising molten salt is a multicomponent Ca (NO3 )2 -KNO3 molten salt. The current work explores the cooling severity of molten Ca (NO3 )2 -KNO3 mixtures, which are commonly used for such purposes. The said mixture, with varying concentrations and bath temperatures was used for quenching the Inconel probe with thermocouples...

The high usage ratio and elevated density of glass fibers (GFs), often surpassing twice that of polymers, can contribute to undesired increases in the overall density of polymeric materials. One potential solution is the incorporation of graphene as a secondary additive, offering a lower specific gravity and exceptional mechanical properties. In light of this, waste tire-derived graphene nanoplates (GNPs) were optimized for coating onto GFs by considering factors such as surface treatment of the fiber, the dispersion quality of GNP, and the coating technique...

Glycolipids such as sugar alcohol esters have been demonstrated to be relevant for numerous applications across various domains of specialty. The use of organic solvents and, more recently, deep eutectic solvents (DESs) to mediate lipase-supported bioconversions is gaining potential for industrial application. However, many challenges and limitations remain such as extensive time of production and relatively low productivities among others, which must be solved to strengthen such a biocatalytic process in industry...

This study delves into the formation of nanoscale polyhedral block copolymer particles (PBCPs) exhibiting cubic, octahedral, and variant geometries. These structures represent a pioneering class that has never been fabricated previously. PBCP features distinct variations in curvature on the outer surface, aligning with the edges and corners of polyhedral shapes. This characteristic sharply contrasts with previous block copolymers (BCPs), which displayed a smooth spherical surface. The emergence of these cornered morphologies presents an intriguing and counterintuitive phenomenon and is linked to process parameters, such as evaporation rates and initial concentration, while keeping other variables constant...

Sutures are a crucial component of surgical procedures, serving to close and stabilize wound margins to promote healing. However, microbial contamination of sutures can increase the risk of surgical site infections (SSI) due to colonization by pathogens. This study aimed to tackle SSI by synthesizing positively charged silver nanoparticles (P-AgNPs) and using them to produce antimicrobial sutures. The P-AgNPs were reduced and stabilized using polyethylenimine (PEI), a cationic branched polymer. The physiochemical characteristics of P-AgNPs were confirmed from the surface plasmon resonance (SPR) peak at 419 nm, spherical morphology with a particle size range of 8-10 nm, PEI functional groups on NPs, a hydrodynamic diameter of 12...

Parkinson's disease (PD) is the second most prevalent neurodegenerative disorder worldwide. According to the Braak hypothesis, the disease spreads along specific neuroanatomical pathways. Studies indicate that fibrillar alpha-synuclein (F-αSyn) can propagate from cell-to-cell by following intercellular connections, leading to the selective death of certain cell groups like substantia nigra dopaminergic neurons and advancing the pathology. Internalized F-αSyn can be eliminated by lysosomes, proteasomes, or chaperones before it replicates inside the cell...

Catalytic aquathermolysis, a crucial aspect of chemical reutilization, converts the heavy components (such as resins and asphaltenes) of residual oil into lighter components. The use of transition-metal-based catalysts accelerates aquathermolysis reactions. It was observed that iron naphthenate exhibited greater efficiency for residual oils compared to manganese naphthenate and zinc naphthenate. Furthermore, the catalytic aquathermolysis of emulsified residual oil with iron naphthenate demonstrated an outstanding catalytic performance...

With the rapid growth of the economy and industrial technology, vigoroso and stable power distribution networks have gradually been established worldwide. Among these networks, underground cables play a crucial role in the distribution process, determining the overall electrical stability of entire cities. Based on density functional theory, this paper first proposes a TiO2 particle-doped MoTe2 monolayer to detect and eliminate these faults and hazardous gases within the underground cableway. The band structure, total density of states, projected density of states, and differential charge density are analyzed...

Utilizing a binding mode-based physicochemical screening method using d-Ala-d-Ala silica gel, two new macrolactams, named banglactams A ( 1 ) and B ( 2 ), were discovered from the culture broth of Nonomuraea bangladeshensis K18-0086. In the course of our investigation, we found that d-Ala-d-Ala silica gel precisely differentiated the chemical structures of banglactams and separated them. However, we were not able to obtain enough of 1 to elucidate the structure due to its instability and insolubility. To overcome this challenge, we chemically modified 1 to improve solubility, enabling us to obtain a sufficient material supply for the indirect determination of the structure...

Oil-bearing sandstone samples were collected from the Lower Cretaceous sequence in the Kharir-2 exploration well, Kharir oilfields (Eastern Yemen). The current study integrates biomarker of the aliphatic hydrocarbon fraction of the extracted oil with a new finding from the molecular structure of the oil-asphaltene, in order to learn more about their properties, including organic matter (OM) input, depositional environment, and thermal maturity. The overall oil composition results show that the extracted oils have a high saturated hydrocarbon of up to 50% and significant levels of aromatic hydrocarbon and polar components, indicating generally paraffinic to naphthenic oil...

Vaccines are considered the most effective tools for preventing diseases. In this sense, with the Covid-19 pandemic, the effects of which continue all over the world, humanity has once again remembered the importance of the vaccine. Also, with the various epidemic outbreaks that occurred previously, the development processes of effective vaccines against these viral pathogens have accelerated. By these efforts, many different new vaccine platforms have been approved for commercial use and have been introduced to the commercial landscape...

The evaluation of a favorable area is crucial for the exploration and exploitation of coalbed methane (CBM) resources. In traditional evaluation methods, the weight of controlling factors for the evaluation of favorable area is often obtained from different models and calculation methods, and the constant weight is commonly used in the entire target area. The influence of the index value of controlling factors and the combination state of these values on the weight is consistently overlooked during the evaluation process...

The cathode materials in lithium-ion batteries (LIBs) require improvements to address issues such as surface degradation, short-circuiting, and the formation of dendrites. One such method for addressing these issues is using surface coatings. Coatings can be sought to improve the durability of cathode materials, but the characterization of the uniformity and stability of the coating is important to assess the performance and lifetime of these materials. For microscale particles, there are, however, challenges associated with characterizing their surface modifications by transmission electron microscopy (TEM) techniques due to the size of these particles...

Hierarchical zeolites can provide multidimensional spatial networks and, therefore, have significant potential as catalysts for the cracking of biomass to generate light olefins. The present work synthesized the diquaternary ammonium-type surfactant [C18 H37 -N+ (CH3 )2 -(CH2 )6 -N+ (CH3 )2 -C6 H13 ]Br2 , incorporating hydrophobic 18-carbon alkyl groups for usage as a structure-directing agent. This compound was subsequently used to prepare nanosheets of a hierarchical ZSM-5 two-dimensional zeolite (HNZSM-5) through a one-pot hydrothermal method...

In the development of proteins, aptamers, and molecular imprints for diagnostic purposes, a major goal is to obtain a molecule with both a high binding affinity and specificity for the target ligand. Cushing syndrome or Addison's disease can be diagnosed by cortisol level tests. We have previously characterized and solved the crystal structure of an anti-cortisol (17) Fab fragment having a high affinity to cortisol but also significant cross-reactivity to other glucocorticoids, especially the glucocorticoid drug prednisolone...