journal
MENU ▼
Read by QxMD icon Read
search

Journal of Adhesive Dentistry

journal
https://www.readbyqxmd.com/read/27869252/resin-dentin-bond-stability-of-experimental-4-meta-based-etch-and-rinse-adhesives-solvated-by-ethanol-or-acetone
#1
Cristiane Mariote Amaral, Alice Marques Diniz, Eugênio Braz Rodrigues Arantes, Glauco Botelho Dos Santos, Jaime Dutra Noronha-Filho, Eduardo Moreira da Silva
PURPOSE: To investigate the influence of 4-META concentration and type of solvent on the degree of conversion (DC%) and resin-dentin bond stability of experimental etch-and-rinse adhesives. MATERIALS AND METHODS: Four different concentrations of 4-META (12 wt%, 20 wt%, 30 wt%, 40 wt%) were added to a model adhesive system consisting of TEG-DMA (25 wt%), UDMA (20 wt%), HEMA (30 wt%), water (4 wt%), camphorquinone (0.5 wt%), and tertiary amine (0.5 wt%) dissolved in 20% acetone (A12, A20, A30 and A40) or 20% ethanol (E12, E20, E30 and E40)...
November 18, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27834413/can-degradation-of-adhesive-interfaces-due-to-water-storage-affect-stress-distributions-a-finite-element-stress-analysis-study
#2
Sema Belli, Oğuz Eraslan, Gürcan Eskitaşcıoğlu
PURPOSE: The aim of this finite-element stress analysis (FEA) was to determine the effect of degradation due to water storage on stress distributions in root-filled premolar models restored with composite using either a self-etch (SE) or an etch-and-rinse (E&R) adhesive. MATERIALS AND METHODS: Four premolar FEA models including root filling, MOD cavity, and composite restorations were created. The cavities were assumed to be treated by SE or E&R adhesives and stored in water for 18 months...
November 10, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27834412/effect-of-sonic-application-of-universal-adhesive-systems-on-bond-strength-of-fiber-posts-to-root-canal
#3
Driellen C Zarpellon, Anna L Szesz, Alessandro D Loguercio, Cesar A G Arrais
PURPOSE: This study evaluated the push-out bond strength (BS) of fiber posts in root canals and the nanoleakage (NL) pattern at the bonding interface when universal adhesives were applied in etch-and-rinse mode to root dentin using an oscillating sonic device. MATERIALS AND METHODS: Fifty-four roots of human premolars were endodontically prepared and divided into 6 experimental groups according to the main factors: adhesive system/resin cement (Ambar Universal/AllCem, Scotchbond Universal/RelyX ARC, Prime&Bond Elect/Enforce) and application mode (vigorous manual or sonic)...
November 10, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27834411/randomized-two-year-clinical-evaluation-of-oxalic-acid-in-restorations-of-noncarious-cervical-lesions
#4
André Mattos Brito de Souza, Nadine Luísa Guimarães Albuquerque, Juliano Sartori Mendonça, Lidiany Karla Azevedo Rodrigues, Sérgio Lima Santiago
PURPOSE: To evaluate the use of oxalic acid in restorations of noncarious cervical lesions. MATERIALS AND METHODS: Twenty volunteers of both sexes between 24 and 55 years old, with at least two lesions that were restored with the techniques to be evaluated, were selected. Ninety teeth were randomly divided into two groups: group 1, two-step etch-and-rinse adhesive technique (control) and group 2, pretreatment with oxalic acid followed by the application of a two-step etch-and-rinse adhesive system...
November 10, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27695716/surface-characterization-and-short-term-adhesion-to-zirconia-after-ultra-short-pulsed-laser-irradiation
#5
Marcella Esteves-Oliveira, Patrick Jansen, Martin Wehner, Andreas Dohrn, Marina Stella Bello-Silva, Carlos de Paula Eduardo, Hendrik Meyer-Lueckel
PURPOSE: To evaluate the suitability of an ultra-short pulsed laser (USPL) to treat zirconia ceramic surfaces and increase their adhesion to dual-curing resin cement. MATERIALS AND METHODS: Twenty 10 × 10 × 5 mm³ blocks were prepared from a zirconia ceramic (Y-TZP). The specimens were polished and randomly assigned to four groups (n = 5) which received the following surface treatments: sandblasting (SB) with Al₂O₃ particles and silica coating (SC) with SiO₂ particles as positive controls; two groups received USPL irradiation, one with 10 scan repetitions (L10) and the other with 20 (L20)...
September 30, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27695714/silorane-based-composite-resin-restorations-are-not-better-than-conventional-composites-a-meta-analysis-of-clinical-studies
#6
Marcela Baraúna Magno, Gláucia Cristina Rodrigues Nascimento, Yasmin Souza Paula da Rocha, Bethânia d'Paula Gonçalves Ribeiro, Sandro Cordeiro Loretto, Lucianne Cople Maia
PURPOSE: To perform a systematic review of the clinical performance of a low polymerization shrinkage, siloranebased composite (SBC) compared with a methacrylate-based composite (MBC) in posterior restorations. MATERIALS AND METHODS: Electronic databases were searched: PubMed, Scopus, Bireme, Science Direct, Web of Science, ClinicalTrials.gov and OpenGrey. The search strategy included MeSH terms, synonyms and keywords with no language or date restrictions. Reference lists of eligible studies were cross checked in an attempt to identify additional studies...
September 30, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27695715/which-factors-influence-the-shear-bond-strength-of-sealant-materials
#7
Meng-Ling Chiang, Sebastian Birlbauer, Yi-Fang Lo, Vinay Pitchika, Alexander Crispin, Nicoleta Ilie, Reinhard Hickel, Jan Kühnisch
PURPOSE: This study investigated the influence of several methodological details on the shear bond strength (SBS) testing of pit and fissure sealants. The following variables were considered: type of enamel surfaces, prismatic vs aprismatic enamel, etching time, and aging and shearing procedures. MATERIALS AND METHODS: The surfaces of 180 healthy human third molars were divided into 4 different sections (mesial, distal, buccal, and oral). After tooth separation, the specimens were randomly allocated to the following groups: 1) enamel preparation: prismatic vs aprismatic; 2) etching: 30 s vs 60 s; 3) aging: 1 day or 3 months vs 5000 thermocycles; 4) shearing: notched-edge method (ISO 29022:2013) vs knife-edge method...
September 29, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27669636/comparison-of-different-protocols-for-performing-adhesive-restorations-in-primary-teeth-a-retrospective-clinical-study
#8
Vinay Pitchika, Isabel Metz, Katrin Rothmaier, Alexander Crispin, Reinhard Hickel, Katharina Bücher, Jan Kühnisch
PURPOSE: To examine the influence of different adhesive restoration protocols on the survival of composite resin restorations in primary teeth. MATERIALS AND METHODS: This study included 601 patients at risk of caries (319 males and 282 females), with a mean age of 6.6 years (range: 1 to 13 years) and an average need for 3.6 restorations per patient (range: 1 to 20). The mean observation period was 1.3 years (± 1.4), with a maximum of 7 years. Six different adhesive restoration protocols with respect to etching, adhesives, and composite materials were analyzed...
September 23, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27669635/tribochemical-glass-ceramic-coating-as-a-new-approach-for-resin-adhesion-to-zirconia
#9
Vinícius Felipe Wandscher, Sara Fraga, João Luiz Pozzobon, Fabio Zovico Maxnuck Soares, Edson Luiz Foletto, Liliana Gressler May, Luiz Felipe Valandro
PURPOSE: To investigate the effects of a novel tribochemical silica coating technique with powders made from feldspathic ceramic and leucite-based ceramic on the bond strength of zirconia to resin cement before and after aging. MATERIALS AND METHODS: Zirconia blocks were divided into 3 groups according to the material used for airborne-particle abrasion: 1) SP (control): silica-coated alumina particles; 2) FP: feldspathic ceramic powder; 3) LP: leucite glass-ceramic powder...
September 23, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27669634/effect-of-hema-phosphate-as-an-alternative-to-phosphoric-acid-for-dentin-treatment-prior-to-hybridization-with-etchand-rinse-adhesive-systems
#10
Tatiana Foscaldo, Glauco Botelho Dos Santos, Luciana Meirelles Miragaya, Marcelle Garcia, Viviane Hass, Eduardo Moreira da Silva
PURPOSE: To evaluate the effect of dentin treatment using HEMA phosphate (HEMA-P) on the microtensile bond strength (μTBS) and nanoleakage of an etch-and-rinse adhesive system. MATERIALS AND METHODS: The occlusal surfaces of human molars were wet ground until superficial dentin was exposed. The specimens were then assigned to two groups according to dentin treatment: PA: 37% H₃PO₄ for 15 s; or HP: HEMA-P for 15 s. Adper Single Bond 2 was applied to the treated dentin surfaces and resin composite buildups were incrementally constructed over them...
September 23, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27532067/dry-bonding-etch-and-rinse-strategy-improves-bond-longevity-of-a-universal-adhesive-to-sound-and-artificially-induced-caries-affected-primary-dentin
#11
Tathiane Larissa Lenzi, Fabio Zovico Maxnuck Soares, Daniela Prócida Raggio, Gabriel Kalil Rocha Pereira, Rachel de Oliveira Rocha
PURPOSE: To evaluate the effect of the etching strategy on the immediate and 1-year microtensile bond strength (μTBS) and structural reliability of a universal adhesive to sound and artificially-induced caries-affected dentin of primary teeth. MATERIALS AND METHODS: Flat midcoronal dentin surfaces were exposed in 50 primary molars, which were then randomly assigned to 10 groups according to substrate (sound dentin [SD] and artificially-induced caries-affected dentin [CAD] with pH cycling for 14 days) and etching approach using Scotchbond Universal Adhesive (self-etching or dry or wet-bonding etch-and-rinse strategies) with Adper Single Bond Plus (two-step etch-and-rinse adhesive) and Clearfil SE Bond (two-step self-etching system) as controls...
August 16, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27532066/is-there-a-best-protocol-to-optimize-bond-strength-of-a-universal-adhesive-to-artificially-induced-caries-affected-primary-or-permanent-dentin
#12
Gabriel Ferreira Nicoloso, Bruna Feltrin Antoniazzi, Tathiane Larissa Lenzi, Fabio Zovico Maxnuck Soares, Rachel de Oliveira Rocha
PURPOSE: To evaluate whether the etch-and-rinse or self-etching mode of a universal adhesive is the best protocol to optimize bond strength to primary and permanent artificially-induced caries-affected dentin. MATERIALS AND METHODS: Flat midcoronal dentin surfaces were exposed in 24 primary and 24 permanent molars and submitted to pH cycling for 14 days to induce artificial caries-affected dentin. For each tooth type (primary and permanent), the teeth were randomly assigned to 4 different groups according to the adhesive systems and bonding strategy: a universal adhesive, Scotchbond Universal Adhesive, in self-etching and etch-and-rinse modes; a twostep etch-and-rinse adhesive, Adper Single Bond 2 (control); and two-step self-etching system, Clearfil SE Bond (control)...
August 16, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27446994/influence-of-surface-treatments-on-the-bond-strength-of-resin-cements-to-monolithic-zirconia
#13
Shaymaa E Elsaka
PURPOSE: To assess the influence of surface treatment on the microtensile bond strength (μTBS) of resin cements to monolithic zirconia materials. MATERIALS AND METHODS: Two types of monolithic zirconia (Zenostar T [ZT] and Prettau Anterior [PA]) were evaluated. The specimens were assigned to three groups based on the surface treatment applied: group 1: control, assintered; group 2: sandblasted with 50-μm Al₂O₃; group 3: tribochemically silica sandblasted. Two types of resin cements (Multilink Speed [MS] and Multilink N [MN]) were applied to each group for evaluating the bond strength using the μTBS test...
July 21, 2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27796376/international-academy-for-adhesive-dentistry-iaad
#14
Jean-François Roulet, Mutlu Özcan
No abstract text is available yet for this article.
2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27796375/editorial-more-self-confidence-for-adhesive-dentistry
#15
Roland Frankenberger
No abstract text is available yet for this article.
2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27595146/repair-protocol-for-amalgam-fillings-with-and-without-cusp-fracture-how-and-why
#16
Mutlu Özcan, Cláudia Ângela Maziero Volpato
No abstract text is available yet for this article.
2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27595145/international-academy-for-adhesive-dentistry-iaad
#17
Markus B Blatz
No abstract text is available yet for this article.
2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27595144/fourteen-years-later
#18
Jorge Perdigão
No abstract text is available yet for this article.
2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27419246/laboratory-performance-of-universal-adhesive-systems-for-luting-cad-cam-restorative-materials
#19
Fabiana Siqueira, Andres Millan Cardenas, Mario Felipe Gutierrez, Pâmela Malaquias, Viviane Hass, Alessandra Reis, Alessandro D Loguercio, Jorge Perdigão
PURPOSE: To evaluate the microshear bond strength (μSBS) of several universal adhesive systems applied on five different indirect restorative materials. MATERIALS AND METHODS: Five CAD/CAM materials were selected: 1) indirect resin composite (LAV); 2) feldspathic glass ceramic (VTR); 3) leucite-reinforced glass-ceramic (EMP); 4) lithium disilicate ceramic (EMX); 5) yttrium-stabilized zirconium dioxide (CZI). For each material, 15 blocks were cut into 4 rectangular sections (6 × 6 × 6 mm) (n = 60 per group), and processed as recommended by the respective manufacturer...
2016: Journal of Adhesive Dentistry
https://www.readbyqxmd.com/read/27419245/effect-of-dentin-pretreatment-on-bond-strength-stability-of-self-etching-and-etch-and-rinse-adhesives-to-intracoronally-bleached-dentin
#20
Ilzes Marianne Borges de Souza, Camila Silva Araújo, Carlos José Soares, André Luis Faria-E-Silva
PURPOSE: To evaluate the effect of chlorhexidine or glutaraldehyde pretreatment on the bonding stability of selfetching and etch-and-rinse adhesives to bleached dentin. MATERIALS AND METHODS: The occlusal surface of 80 third molars was abraded to expose a flat mid-dentin surface, which was then subjected to a bleaching procedure using 20% hydrogen peroxide and sodium perborate for 14 days. Afterwards, the specimens were kept in distilled water, followed by application of either a three-step etchand- rinse (Adper Scotchbond Multi-Purpose Plus, SBMP) or a two-step self-etching (Clearfil SE Bond, CSE) adhesive system...
2016: Journal of Adhesive Dentistry
journal
journal
34680
1
2
Fetch more papers »
Fetching more papers... Fetching...
Read by QxMD. Sign in or create an account to discover new knowledge that matter to you.
Remove bar
Read by QxMD icon Read
×

Search Tips

Use Boolean operators: AND/OR

diabetic AND foot
diabetes OR diabetic

Exclude a word using the 'minus' sign

Virchow -triad

Use Parentheses

water AND (cup OR glass)

Add an asterisk (*) at end of a word to include word stems

Neuro* will search for Neurology, Neuroscientist, Neurological, and so on

Use quotes to search for an exact phrase

"primary prevention of cancer"
(heart or cardiac or cardio*) AND arrest -"American Heart Association"