European Journal of Prosthodontics and Restorative Dentistry

UNLABELLED: Molar-incisor hypomineralisation (MIH) is a qualitative defect of the enamel structure. Indirect restorations may represent the most suitable therapeutic solutions for patients presenting MIH with tooth restorative procedures. This systematic review aims to determine the feasibility of indirect restorations. MATERIALS AND METHODS: A systematic review has been performed and is reported following the PRISMA guidelines. It was performed on three databases (PubMed, Science Direct, and Google Scholar)...

AIM: Evaluate the influence of occlusal loading on the stress distribution of endodontically treated teeth after root canal preparation with different file's sizes and tapers by means of finite element analysis. METHODOLOGY: Seven three-dimensional models of a single-rooted, single-canal lower second premolar were established, one healthy control and six endodontically treated and restored models. The shape of root canal preparations followed file configurations 30/...

This case report compares a conventional and a digital workflow for manufacturing metal frameworks for maxillary and mandibular removable partial dentures (RPDs). Two sets of maxillary and mandible RPDs were produced. The metal framework of one set of RPDs was produced conventionally using the lost wax casting technique. Intraoralscanning and computer-aided designing (CAD) were used to fabricate the metal frameworks of the other set of RPDs using direct metal laser sintering (DMLS) technology. The accuracy of fit of the two sets of RPDs was evaluated after 3 months using replica models...

INTRODUCTION: The degree of conversion (DC) of resin cements can be affected by ceramics, and by the type of resin cement. The purpose was to evaluate the influence of thickness and translucencies of lithium disilicate ceramic on the DC of resin cements: two light-cure (Variolink LC; NX3 LC) and one dual-cure (NX3 Dual). METHODS: IPS e.max Press ceramic (A2) discs were prepared in 4 thicknesses (0.3, 0.5, 1.0, and 1.5 mm) and in 3 translucencies: HT (high translucency), LT (low translucency), and MO (medium opacity)...

INTRODUCTION: Additive manufacturing is a tool with potential use in medicine and dentistry. The manufacture of metals and composites is already advanced, however, concerns about titanium hypersensitivity, tissue staining, and corrosion caused by gradual material degradation encourage research into more biocompatible alternatives. OBJECTIVE: This systematic scoping review aimed to gather studies that evaluated zirconia implants produced by additive manufacturing to describe the current stage of the printing technique and the final product...

INTRODUCTION: This in-vitro study investigated limitations of intra-oral scanners (IOS) in capturing palatal defects at decreased mouth openings. The trueness and precision of composite 3D-printed models from Cone-Beam Computed Tomography (CBCT) and IOS were measured. METHODS: A partially dentate palatal defect model was scanned with IOS (3M™TrueDefinition) at various simulated mouth openings. Five silicone impressions were poured in gypsum. Scans were taken using 3M™TrueDefinition; Planmeca Planscan®, n=5 each...

INTRODUCTION: Pit and fissure sealants are effective in preventing caries disease, however, they may present flaws that damage the physical barrier leading to treatment failure. OBJECTIVE: To answer the question ''Do pit and fissure sealants present good adhering to the dental structure when analyzed by their resistance to shear/microshear?". METHODS: This systematic review followed the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) and was recorded in Open Science Framework...

INTRODUCTION: The association of the periodontium with the fixed prosthesis is the basis of prosthetic rehabilitation. This prospective case series aimed to evaluate periodontal health through the relation between periodontal/peri-implant disease progression and the use of fixed partial dentures (FPDs). METHODS: Probing depth (PD), clinical attachment level (CAL), gingival index (GI), and plaque index (PI) on either teeth or implants were evaluated at up to 25-year follow-up and compared with the baseline...

INTRODUCTION: The aim of this systematic review was to assess the literature reporting on the failure rates, survival rates and complication rates and patient reported outcome measures (PROMs) of anterior full (FC) or partial (PC) coverage single tooth restorations after a mean observation period of at least 3 years. METHODS: Systematic search was conducted using the electronic databases: MEDLINE, EMBASE and Cochrane library. Data regarding survival (restoration failure) and complication rates and PROMs were extracted and presented descriptively...

INTRODUCTION: The purpose of this systematic review was to evaluate how prosthetic factors affect the incidence of peri-implantitis in patients treated with single implant restorations. METHODS: Electronic and manual search of two indexed databases up to April 2023 were conducted, to identify clinical studies reporting on the effect of different prosthetic factors on the incidence of peri-implantitis around single implants and with at least 1 year follow-up. The risk of bias was assessed with the Joanna Briggs Institute critical appraisal checklist, the ROB2 and the ROBINS-I tools...

PURPOSE: The aim of this study was to evaluate the surface wear and retention force of telescopic attachments made of zirconia primary crowns and poly-ether- ketone -ketone (PEKK) secondary crowns for 2-implant retained mandibular complete overdentures. MATERIALS AND METHODS: Ten healthy completely edentulous patients aged 55-60 years were selected for this study. Each patient received two implants in the mandibular canine regions. Maxillary conventional complete dentures were constructed against implant-retained mandibular overdentures for all patients...

INTRODUCTION: The aim of this paper is to compare the survival and success rates of endodontically treated posterior teeth restored with full veneer crowns or full cuspal coverage onlays in vivo. METHODS: A literature search using PubMed, Medline and Embase via Ovid, and The Cochrane Library retrieved English and non-English language articles from 1946 to April 2022. Electronic searches were supplemented with the use of forward citation chaining via Google Scholar...

INTRODUCTION: This systematic review examined the effect of neutralizing agents on bond strength after irrigation with sodium hypochlorite and their existing protocols in literature. METHODS: This present study adhered to the PRISMA guidelines and was registered at PROSPERO. Five electronic databases were searched (sept-2020/jan-2021) in English, Spanish, and Portuguese, without any restrictions on publication date. Cases reports, editorials and literature reviews were not included...

The aim of this study was to verify the effect of finishing and polishing procedures and glaze application on biaxial strength and surface properties of milled feldspathic ceramic blocks. Forty disc-shaped samples (14 mm diameter, 1.2 mm thickness) were divided in four groups (n = 10): C (control): no finishing and polishing; FP: finishing and polishing; G: glaze; and GFP: finishing and polishing + glaze. The specimens were subject to surface gloss (glossmeter) and roughness (profilometer) tests followed by biaxial flexural strength (universal testing machine) and Vickers hardness (microhardness tester) tests...

INTRODUCTION: The aim of this study was to investigate the co-influence of indirect mesio- occlusal-distal (MOD) cavity geometry and inlay restoration bonding on quasi-static fracture load of the restored tooth. METHODS: Forty-eight intact human molar teeth were selected and prepared for standardized edge-shaped or round-shaped MOD cavities. The resin composite (Cerasmart, GC) inlays were bonded with the state-of-the-art inlay bonding protocol or with intentionally deteriorated bonding using n-hexane-wax solution for preconditioning...

Quantifying in edentulous patients the facial collapse and whether complete conventional denture (CCD) and implant-supported fixed complete denture (ISFCD) can restore the facial proportions to match those of a dentate patient (CG) is relevant for clinical dentists. One hundred and four participants were enrolled and divided into edentulous (n=56) and CG (n=48). The edentulous participants were rehabilitated with CCD (n=28) or ISFCD (n=28) in both arches. Anthropometric landmarks in the face were marked and captured by stereophotogrammetry...

PURPOSE: This clinical observational study aimed to determine the reproducibility of digital color measurement methods of different front teeth. METHODS: Color determination was performed using two spectrophotometric systems (Easyshade Advance; ES and Shadepilot; SP) and digital photography using a camera with ring flash and gray card with subsequent evaluation using computer software (DP; Adobe Photoshop). In 50 patients, at two time points, a digital color determination was performed on maxillary central incisors (MCI) and maxillary canines (MC) by a calibrated examiner...

INTRODUCTION: Adjustments with diamond burs on the ceramic surface can affect its roughness and decrease flexural strength. This study evaluated the effect of polishing or glazing on the surface roughness and biaxial flexural strength of a zirconia-reinforced lithium silicate glass-ceramic upon adjustment with diamond burs. METHODS: Seventy disks were prepared according to ISO 6872 and divided into seven groups (n = 10) according to different adjustments and finishing processes...

To assess the clinical periodontal status of abutment teeth in regards of different design components of distal-extension removable partial dentures. Subjects (N=100) with acrylic or cobalt-chromium distal-extension removable partial dentures were enrolled and their periodontal parameters plaque and gingival indices [PI, GI], probing depths [PD], clinical attachment loss [CAL] and a mobility index [MI] evaluated. Denture base type, major connector, occlusal rests position, design of direct retainers, retention, stability and denture wearing habits were further evaluated...

PURPOSE: The objective of this systematic review was to evaluate and compare the accuracy of digital impression techniques and conventional methods for full-arch implant impressions. METHODS: An electronic literature search in the databases Medline (Pubmed), Web of Science, and Embase was performed to identify in vitro and in vivo publications (between 2016 and 2022) directly comparing digital and conventional abutment-level impression techniques. All selected articles passed through the data extraction procedure according to defined parameters in inclusion and exclusion criteria...