International Journal of Oral & Maxillofacial Implants

PURPOSE: The aim of this study was to investigate the biocompatibility of AgNPs-doped Ti6Al4V surfaces, by evaluating the viability and proliferation rate of human gingival fibroblasts (HGF) -as dominant cells of peri-implant soft tissues- seeded on the modified surfaces. MATERIALS AND METHODS: AgNPs of 8 and 30nm size distributions were incorporated onto Ti6Al4V specimen surfaces by electrochemical deposition, using colloid silver dispersions with increasing AgNP concentrations of 100, 200 and 300 ppm...

PURPOSE: To evaluate bone preservation and aesthetic recovery between the socketshield technique (SST) with different labial bone plate thicknesses and the conventional immediate implant technique (CIIT). MATERIALS AND METHODS: Patients who underwent immediate implant placement in the anterior region were divided into three groups: the SST with a thick-wall phenotype (> 1 mm) (SSTA group), the SST with a thin-wall phenotype (< 1 mm) (SSTB group) and the CIIT with a thick-wall phenotype (> 1 mm) (CIIT group)...

PURPOSE: This study aimed to assess the accuracy and precision of prosthetically-driven implant placement achieved through static computer-aided implant surgery. The primary objective was to analyze the linear and angular deviations of dental implants in patients treated at a university dental clinic. Various types of surgical techniques and templates were utilized to optimize implant positioning. MATERIALS AND METHODS: A total of fiftythree dental implants were included in this study...

PURPOSE: Marginal bone resorption (MBR) around oral implants may sometimes be a selflimiting condition due to balancing immunological reactions against the utilized materials, rather than a progressive bacterial infection. Contrary to previous assumptions from ligature induced experimental peri-implantitis studies, our recent 8-week experiment showed that marginal ligatures per se trigger an inflammatory immune response, resulting in bone resorption around implants in absence of a plaque...

PURPOSE: Maxillary sinus floor augmentation is a safe and predictable technique used to increase bone volume under sinus cavity for implant placement in atrophic posterior maxilla before implant placement. Despite conflicting results concerning the new bone formation rates with or without a barrier membrane, the benefits of using a collagen membrane to cover the lateral bone window has been demonstrated, in order to prevent bone substitute particles dislodgement that may occur from the sinus cavity through the sinus antrostomy towards the oral mucosa, and to significantly reduce the postoperative swelling and pain reactions...

PURPOSE: The purpose of this study was to examine the mechanical influence of edentulous mandibular morphology on peri-implant bone in implant prosthetics by finite element analysis. MATERIALS AND METHODS: Computed tomographic data from 25 patients with edentulous mandibles were selected and the radius of mandibular curvature and the height of the mandible at the midline were measured in order to clarify the morphological characteristics of the mandible. From the measurement, two patients with the smallest and largest radii of the mandible were selected...

PURPOSE: Laser-created titanium surface topographies enhance soft tissue attachment and implant stability. However, knowledge about the underlying mechanisms governing the tissue-level reaction is lacking. The objective of this study was to examine the behavior and function of human gingival fibroblasts growing on healing abutments with or without laser-textured topography. MATERIALS AND METHODS: Human primary gingival connective tissue fibroblasts were cultured on healing abutments with machined or laser-textured (Laser-Lok, BioHorizons) surfaces...

PURPOSE: To evaluate the influence of immediate loading on osseointegration and bone density of implants installed in a healed alveolar bone crest and supporting single crowns. MATERIALS AND METHODS: Two solid titanium transmucosal mini-screws were inserted in the distal regions of the mandible in 14 patients. One mini-implant was immediately functionally loaded, whereas the other was left unloaded. After two months of healing, biopsies were retrieved and new bone, old bone, and total bone (new and old bone) were assessed...

PURPOSE: This retrospective clinical follow-up study assesses double-crown retained implanttooth- supported removable partial dentures (DCR-ITSRPDs) survival, evaluates abutment survival and identifies first aftercare measures. MATERIALS AND METHODS: The influence of various factors on the survival of the DCR-ITSRPDs and the abutments were observed in this retrospective clinical follow-up study using Kaplan-Meier estimate. In addition, the first occurred aftercare measure per prosthesis was evaluated...

PURPOSE: This in-vitro study aims to investigate whether the wettability of two zirconia implant disk surfaces is affected by glycine and erythritol air-polishing, using saline, bovine serum albumin, bovine thrombin, and bovine artificial blood as the testing mediums. MATERIALS AND METHODS: Zirconia disks were provided by two implant companies: SDS. (Swiss Dental Solutions, Plymouth, MA, USA) (n=6) and Patent. (Zircon Medical AG, Altendorf, Switzerland) (n=6). Surface parameters (Sa, Sz, Sdr, Ssk, Sku, and Spd) were measured to determine their initial surface roughness...

PURPOSE: Despite the high clinical accuracy of dynamic navigation, inherent sources of error exist. The purpose of this study was to improve the accuracy of dynamic navigated surgical procedures in the edentulous maxilla by identifying the optimal configuration of intra-oral points that results in the lowest possible registration error for direct clinical implementation. MATERIALS AND METHODS: Six different 4-area configurations were tested by 3 operators against positive and negative controls (8-areas and 3-areas, respectively) using a skull model...

PURPOSE: To investigate the effect of lateral sinus floor elevation (LSFE) on sinus membrane (SM) thickness and sinus health in mucosa thickness less and more than 5 mm. MATERIALS AND METHODS: LSFE was performed in a prospective controlled clinical trial on two groups with less than and more than 5 mm (group A & B) SM thickness and followed for 6 months. Using preoperative and 6-month postoperative CBCT and clinical evaluation, SM thickness changes (primary outcome variable), sinus health, augmented bone height, and length (augmentation adequacy), membrane-related variables, and operation time were measured...

BACKGROUND: Simvastatin (SMV), a lipid lowering drug, can modulate the process of bone regeneration at the molecular and cellular levels. Its effect on the osseointegration of implants has been studied extensively on animals with assuring results with limited research on human subjects. AIM: To estimate the effect of simvastatin gel in the osseointegration of dental implants using bone scintigraphy, Materials and Methods: 20 participants with missing mandibular first molars and D2 type bone were assigned equally to Group A receiving 1...

PURPOSE: To investigate the esthetic outcomes based on the color differences in zirconia of varying thickness, resin cement color, and types of titanium implant surface treatments. MATERIALS AND METHODS: Twenty-eight HTMZ specimens were arranged into four groups based on zirconia thickness: 1.0, 1.5, 2.0, and 2.5 mm (n=7). Each group was tested using two resin cement colors (n=7) (clear and opaque) in combination with six surface-treated titanium groups (n=7): untreated titanium (UT), anodization (AN), 50-μm alumina airborne-particle abrasion followed by AN (SBAN), AN followed by 50-μm alumina airborne-particle abrasion (ANSB), 95% hydrofluoric acid followed by AN (HFAN), and AN followed by 95% hydrofluoric acid (ANHF) for the 48 experimental groups, and using composite resin (n=7) (A2D) for the four control groups...

PURPOSE: The objective of this systematic review is to assess the impact of implant placemen at different periods on the aesthetic and clinical outcomes, in the aesthetic zone. MATERIAL AND METHODS: Literature screening was conducted in PubMed, ScienceDirect and Cochrane library databases. Relevant articles were chosen according to selection criteria and Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Data was collected from studies published from 2017-2022 in English...

PURPOSE: The aim of this multi-center cohort study in private practices was to retrospectively determine the Cumulative Survival Rate (CSR) and the marginal bone level change (ΔMBL) around novel hybrid design Tissue-Level (TL) dental implants supporting multiple screw-retained restorations. These implants feature a platform-switched transgingival region at the crestal margin designed to support marginal bone stability and implant survival. MATERIALS AND METHODS: Implant CSRs were analyzed at implant and patient level using Kaplan-Meier...

Natural Coral Particles (NCPs) are a suitable scaffold material for Guided Bone Regeneration (GBR) procedures; it combines the placement of a bone substitute supporting a barrier membrane. Due to increasing sea pollution and the declarations of endangered coral species (KYOTO 1997), they are no longer suitable for the medical industry. Novel domestic corals have been grown under controlled conditions to produce cultivated coral graft (CCG) material. This study aimed to evaluate a new CCG in an in vivo experimental GBR procedure...

PURPOSE: To determine the characteristics of dental implant transmucosal surfaces that influence soft tissue attachment and marginal bone loss (MBL). MATERIALS AND METHODS: The PubMed, Embase, and Cochrane Library electronic databases were searched based on predefined PICO eligibility criteria. Data from animal studies that compared junctional epithelium and connective tissue attachment and MBL from 4 days to 72 weeks were analyzed. The risk of bias was performed with the Systematic Review Centre for Laboratory Animal Experimentation tool...

PURPOSE: To report the prevalence of early implant failure and evaluate factors that contribute to the early failure of dental implants placed at a teaching clinic. The study also aims to identify risk indicators for early implant loss to better predict and prevent early implant loss in the future. MATERIALS AND METHODS: This retrospective study included all patients with a dental implant placed by the Section of Oral Surgery and Oral Medicine, Department of Clinical Dentistry, University of Bergen, between January 2011 and December 2018...

PURPOSE: To evaluate the usefulness of ridge augmentation using a customized titanium mesh (CTM) that was preformed by trimming and bending the commercial titanium mesh on a virtually reconstructed 3D acrylic resin model using clinical, radiologic, histologic, and histomorphometric analyses. MATERIALS AND METHODS: This study was designed prospectively for patients who required vertical ridge augmentation using a staged approach before implant surgery. After installation of the CTM, grafting was performed using deproteinized porcine bone mineral covered with an absorbable membrane...